| New and Interesting Products |
|
|
| 2000W Solid-State Power Amplifier from 1 to 6 GHz | |
EMC Power Amplifiers
from Exodus Advanced Communications
|
| The AMP20190 from Exodus Advanced Communications is a Solid-State power Amplifier that operates from 1 to 6 GHz. It delivers a saturated output power of more than 2000 W and a power gain of more than 63 dB. This amplifier is based on a Class A/AB linear design and uses high-power advanced devices for instantaneous L, S, and C-band ultrawide bandwidth for all suitable signal channel modulation applications. |
|
Download Datasheet
Product Details | |
|
|
|
| RF Shielded Test Enclosure from DC to 6 GHz | |
Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX-0600 from LabiFix Innovations is an RF Shielded Test Enclosure that covers frequencies up to 6 GHz. It has a high-performance RF absorber lining that provides a shielding effectiveness of up to 90 dB. This test enclosure has a user-defined & interchangeable I/O connectors including filtered Ethernet - 10M, 100M, 1G, USB 2.0 & 3.0, DB9, DB15, DB25, DB50, and RJ11 ports. It also has SMA, SMB, BNC, TNC, and UHF RF interfaces, filtered HDMI, VGA & audio ports, and an ST waveguide interface for fiber optics. |
|
Download Datasheet
Product Details | |
|
|
|
| Current Probe from 20 Hz to 100 MHz | |
Current Probe
from ETS-Lindgren
|
| The 91550-1L from ETS-Lindgren is a Current Probe that covers a frequency range from 20 Hz to 100 MHz. It can measure currents of up to 350 A (DC-60 Hz and 400 Hz), 100 A (pulse), and 42 A (CW RF). This probe is capable of measuring RF currents without direct connection and has a 3.18 cm (1.25 in) window, making it suitable for measurements on most power cables. It can be precisely calibrated down to 20 Hz and complies with test limits such as MIL-STD-462, CEO1 and RSO1. |
|
Download Datasheet
Product Details | |
|
|
|
| Comb Generator from 30 MHz to 6 GHz | |
Comb Generator
from TEKBOX Digital Solutions
|
| The TBCG1-25MHz from TEKBOX Digital Solutions is a Comb Generator that operates from 30 MHz to 6 GHz. It produces spectral lines with a comb frequency of 25 MHz, which is useful in test setups for conducted or radiated emissions. This generator has 2 mm banana plug receptacles on the side for external dipole elements that can be connected to the comb generator in parallel to the internal antenna. It operates on a 9 V PP3 (E-block) alkaline battery and consumes 80 mA of current. |
|
Download Datasheet
Product Details | |
|
|
|
| Water-based Nickel Conductive Paint for EMF Shielding up to 40 GHz | |
Conductive Coating and Paint
from M.G. Chemicals
|
| The 841WBU from M.G. Chemicals is a water-based nickel conductive paint that supports high band frequencies of up to 40 GHz used in 5G. It is used for EMF shielding against not only high-frequency electric fields but also attenuating magnetic fields. This paint uses a water-based polymer system pigmented with highly conductive nickel flakes with a flat flake morphology, meaning it covers a large surface area at low thickness. |
|
Download Datasheet
Product Details | |
|
|
|
| Dual Ridged Horn Antenna from 700 MHz to 18 GHz | |
EMC Antenna
from EM Antennas
|
| The EM-7102R from EM Antennas is a Dual Ridged Horn Antenna that operates from 700 MHz to 18 GHz, covering L, S, C, X, and Ku bands. It has a gain of 0.1-13 dBi and a 3dB beamwidth of 80° to 20° (Azimuth/elevation). This linearly/vertically polarized antenna has an updated design that features the maximum gain of the antenna along its boresight without nulls or lobe-splitting. It can handle a CW power of 100 W & a peak power of 300 W and has a VSWR of less than 3.5:1. |
|
Download Datasheet
Product Details | |
|
|
| Sponsored by EMC & CI 2026 | | | |
|
|
| Near Field Probe Set for Frequencies up to 40 GHz | |
Near Field Probe
from Langer EMV-Technik GmbH
|
| The HR1 set from Langer EMV-Technik GmbH is a Near Field Probe Set that covers a frequency range of up to 40 GHz. It contains one HR-E 40-1 E-field probe and one HR-R 8-1 magnetic field probe with an HR SF550S microwave cable. This set also includes an HR-E and an HR-R characteristic. The HR-E 40-1 E-field probe contains a current attenuator, and the HR-R 8-1 magnetic field probe contains a shield surface current suppressor. |
|
Download Datasheet
Product Details | |
|
|
|
| EMI Signal Generator from 4 kHz to 1 GHz | |
EMI Signal Generator
from Raditeq
|
| The RGN2001B by Raditeq is an EMI Signal Generator that operates from 4 kHz to 1 GHz with a frequency resolution of 1 Hz. This generator produces a modulated or unmodulated RF carrier signal with an output level ranging from +13 dBm to -70 dBm. This signal generator has an output level setting time of less than 1 ms and an amplitude accuracy of ±1 dB. It has a harmonic of less than -20 dBc, sub-harmonics of less than -90 dBc, and non-harmonic spurious of -60 dBc. |
|
Download Datasheet
Product Details | |
|
|
|
| Automated ESD Test System from ±5V to ±8kV | |
ESD Simulator
from Electro-Tech Systems
|
| The Model 9910 PinScan from Electro-Tech Systems is an Automated ESD Test System that generates ESD pulses from ±5V to ±8kV. It uses PinPulse technology to provide reliable, high-quality, low parasitic discharges utilising a 2-pin test method to determine the susceptibility level of electronic devices. This ESD test system uses proprietary ETS technology utilising specialised relays and supports Human Body Model (HBM), Machine Model (MM) and Human Metal Model (HMM) built-in ESD models. |
|
Download Datasheet
Product Details | |
|
|
|
| Reverberation Chamber from 1 to 18 GHz | |
Reverberation Chamber
from Comtest Engineering BV
|
| The DO-160 from Comtest Engineering BV is a Reverberation Chamber that has a shielding effectiveness from 1 to 18 GHz according to EN-50147-1 standard. It has a Z-fold stirrer system, EUT power line filters, absorbers for loaded calibration and EMC hardened F.O. converters. This reverberation chamber has a volume of 0.5 x 0.6 x 0.9 m and a field uniformity according to RTCA-DO-160-G standard. It measures 1.35 x 1.05 x 2.10 m with a friction-free door that measures 0.6 x 0.9 m and has waveguides for fiber cables & an antenna mounting pole. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| EMC Scanners with E/H-Field Probes up to 10 GHz | |
EMC Scanner
from Pendulum Instruments
|
| The SCN-500 Series from Pendulum Instruments are EMC Scanners that can scan emissions up to 10 GHz. They perform repetitive high-resolution 4D (3D movement plus rotation of the probe head) scanning of radiation down to 100 µm steps using various 3/6/10 GHz E/H-field probes. These scanners support a MultiScan measurement feature that enables field plots from any frequency within the measured wide band span. |
|
Download Datasheet
Product Details | |
|
|
| Sponsored by EMC & CI 2026 | | |
|
|
| E-Field Generator from 10 kHz to 25 MHz | |
E-Field Generator
from AMETEK CTS GmbH
|
| The ATE10K25M-1 from AMETEK CTS GmbH is an E-Field Generator that operates from 10 kHz to 25 MHz. It produces an E-field intensity of 200 V/m and uses low-inductance internal load resistors to terminate the RF power and incorporates a broadband transformer to increase the output voltage. This generator can handle an input CW power of up to 3000 W, and has a VSWR of less than 3.5:1. It measures 303.53 x 222.25 x 101.8 cm and has C female or 7-16 DIN female connectors. |
|
Download Datasheet
Product Details | |
|
|
|
| Harmonics & Flicker Analyzer from 45 to 65 Hz | |
Harmonics & Flicker Analyzer
from Computer & Networking Services
|
| The HFA-1-16S from Computer & Networking Services is a Harmonics & Flicker Analyzer that covers a frequency range of 45-65 Hz. It uses a PLL-based sampling method with a sampling speed of 512 Samples/cycle (simultaneous per channel) or a fixed frequency sampling method. This analyzer performs harmonic analysis of up to harmonic order 200 (10/12 kHz) and has a power measurement range of 1-15000 W with a phase range of 0-360°. |
|
Download Datasheet
Product Details | |
|
|
|
| EMC Absorbers from 70 MHz to 40 GHz | |
EMC Absorbers
from Frankonia Germany EMC Solutions GmbH
|
| The HF Series from Frankonia are EMC Absorbers that cover a frequency range from 70 MHz to 40 GHz. They can handle a power of up to 80 dBm and are tested per IEEE 1128 in coax line (less than 1 GHz), and in Arch (less than 1 GHz) at several incidences. These pyramid/wedge shaped absorbers are based on the existing Frankosorb® technology and are classified as A2 non-combustible per EN13501-01. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| EMC Solid-State Power Amplifier from 9 kHz to 100 MHz | |
EMC Power Amplifiers
from Elite RF
|
| The DA9K100M5555AC from Elite RF is an EMC Solid-State Power Amplifier that operates from 9 kHz to 100 MHz. It delivers a CW output power of more than 400 W and a gain of 56 dB. This amplifier has harmonics of less than -18 dBc and spurious signal levels of less than -60 dB with an input VSWR of less than 2:1. It requires an AC supply of 100-240 V and consumes less than 2100 W of power. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Bulk Current Injection Probe for Susceptibility Testing from 10 kHz to 300 MHz | |
Bulk Current Injection (BCI) Probe
from The EMC Shop
|
| The BCIP300M from The EMC Shop is a Bulk Current Injection (BCI) Probe that operates from 10 kHz to 300 MHz. It is designed to inject RF current into cables of electrical equipment and test susceptibility as per IEC 61000-4-6 and MIL-STD-461 standards. This makes the probe ideal for medical, military, and other RF applications. The probe can be easily clamped around test conductors during testing. |
|
Download Datasheet
Product Details | |
|
|
|
| 10 A Double-Stage EMI Filters | |
EMC / EMI Filter
from Elcom International Pvt. Ltd.
|
| The EC20 Series from Elcom International are Double-Stage EMI Filters designed to provide high attenuation performance in cost-effective packages. They have a voltage rating of 120/250 VAC and a current rating of 10 A. These filters incorporate a feed-through capacitor and have a self-healing dielectric for high reliability. They have very low internal series inductance and high self-resonant frequency. |
|
Download Datasheet
Product Details | |
|
|
|
| EMI Filtered Connector Compliant with Military Specifications | |
EMI Filtered Connector
from SMITH Interconnect
|
| The L100 from Smiths Interconnect is an EMI Filtered Connector that is designed to be intermateable and interchangeable with standard non-filter connectors. It has an insertion loss of 4.1-77.7 dB and a capacitance of 80-120 nF (at 1 kHz, 1 Vrms). This connector has a voltage rating of 100 V and can withstand a dielectric voltage of 250 VDC. |
|
Download Datasheet
Product Details | |
|
|
|
| Pulse Limiter from 9 kHz to 30 MHz | |
Transient Limiter
from AFJ INSTRUMENTS Srl
|
| The PAT10M from AFJ Instruments is a Pulse Limiter that covers a frequency range of 9 kHz to 30 MHz. It is designed to protect RF input stages of sensitive equipment from unpredictable spikes generated during conducted emission testing. This pulse limiter has an attenuator with an attenuation of 10 dB and can handle input pulsed/CW voltages up to 1 W. |
|
Download Datasheet
Product Details | |
|
|
|
| IC-Stripline TEM Cell from DC to 8 GHz | |
TEM / GTEM Cell
from ESDEMC Technology
|
| The EM603-8 from ESDEMC Technology is an IC-Stripline TEM Cell that operates from DC to 8 GHz. It generates a consistent and predictable TEM test field inside the cell for testing small devices such as ICs and wireless communication modules. This TEM cell can test up to 12.5 kV/m at 53 dBm injected power (maximum rating) when an external test signal is applied through its input port. |
|
Download Datasheet
Product Details | |
|
Please wait...