Weekly EMC Insights: News, Products and Articles

31 March, 2026 Newsletter - EMC Directory

Top news & products. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


EMC Insights
Date: 31 March, 2026

Featured Products this Week

35 W EMC Solid-State Power Amplifier from 1000 to 2000 MHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP10003 from Exodus Advanced Communications is an EMC Solid-State Power Amplifier that operates from 1000 to 2000 MHz. It delivers a saturated output power of more than 35 W and a power gain of more than 45 dB. This power amplifier is based on a Class AB linear GaN design that provides instantaneous bandwidth and is suitable for all modulation standards.

Download Datasheet

EMC Scanners with E/H-Field Probes up to 10 GHz

EMC Scanner from Pendulum Instruments

The SCN-500 Series from Pendulum Instruments are EMC Scanners that can scan emissions up to 10 GHz. They perform repetitive high-resolution 4D (3D movement plus rotation of the probe head) scanning of radiation down to 100 µm steps using various 3/6/10 GHz E/H-field probes. These scanners support have a MultiScan measurement feature that enables field plots from any frequency within the measured wide band span.

Download Datasheet

Current Probe from 20 Hz to 100 MHz

Current Probe from ETS-Lindgren

The 91550-1L from ETS-Lindgren is a Current Probe that covers a frequency range from 20 Hz to 100 MHz. It can measure currents of up to 350 A (DC-60 Hz and 400 Hz), 100 A (pulse), and 42 A (CW RF). This probe is capable of measuring RF currents without direct connection and has a 3.18 cm (1.25 in) window, making it suitable for measurements on most power cables.

Download Datasheet

E-Field Generator from 10 kHz to 25 MHz

E-Field Generator from AMETEK CTS GmbH

The ATE10K25M-1 from AMETEK CTS GmbH is an E-Field Generator that operates from 10 kHz to 25 MHz. It produces an E-field intensity of 200 V/m and uses low-inductance internal load resistors to terminate the RF power and incorporates a broadband transformer to increase the output voltage. This generator can handle an input CW power of up to 3000 W, and has a VSWR of less than 3.5:1.

Download Datasheet

EMI Signal Generator from 4 kHz to 1 GHz

EMI Signal Generator from Raditeq

The RGN2001B by Raditeq is an EMI Signal Generator that operates from 4 kHz to 1 GHz with a frequency resolution of 1 Hz. This generator produces a modulated or unmodulated RF carrier signal with an output level ranging from +13 dBm to -70 dBm. This signal generator has an output level setting time of less than 1 ms and an amplitude accuracy of ±1 dB.

Download Datasheet

Sponsored by IMS 2026

Revolutionizing RF

Join us at the 2026 IEEE International MTT Symposia (IMS2026), 7-12 June in Boston, MA. Step into the future of microwave and RF innovation at the premier destination where the global community comes together to connect, collaborate, and stay ahead of the latest advancements. Click here to learn more.

EMI Absorber Sheet from 2 to 6 GHz for Sub-6 GHz Noise Suppression

EMC Absorbers from KITAGAWA INDUSTRIES America

The MG-13 from KITAGAWA INDUSTRIES America is an EMI Absorber that operates from 2 to 6 GHz. It is designed for suppressing electromagnetic emission for managing internal interference issues across Wi-Fi, 5G, and GPS wireless devices. This absorber can be attached to any enclosure, cable, or around PCBs, enabling easy noise reduction.

Download Datasheet

Reverberation Chamber from 1 to 18 GHz

Reverberation Chamber from Comtest Engineering BV

The DO-160 from Comtest Engineering BV is a Reverberation Chamber that has a shielding effectiveness from 1 to 18 GHz according to EN-50147-1 standard. It has a Z-fold stirrer system, EUT power line filters, absorbers for loaded calibration, and EMC hardened F.O. converters. This reverberation chamber has a volume of 0.5 x 0.6 x 0.9 m and a field uniformity according to RTCA-DO-160-G standard. It measures 1.35 x 1.05 x 2.10 m with a friction-free door that measures 0.6 x 0.9 m.

Download Datasheet

One-Piece Board Level Shield with Plating Thickness from 1.25 to 5.00 Microns

EMC Board Level Shield from Laird

The BMI-S-109 from Laird is a One-Piece Board-Level Shield that has a plating thickness of 1.25 to 5.00 microns. It is made of Cold Rolled Steel (CRS) and has a base material thickness of 0.20 mm with a coplanarity of less than 0.10 mm. This surface-mounted shield has castellations and ventilation.

Download Datasheet

Single Phase EMC/EMI Filters from DC to 400 Hz

EMC / EMI Filter from Altran Magnetics

The AMI-1010 Series from Altran Magnetics are Single Phase EMC/EMI Filters that operate from DC to 400 Hz. They have a test voltage of 1414 VDC (P to N), 2250 VDC (P+N to G) and 1500 VAC (P+N to G). These filters are available in medical versions also with no leakage current. They require a DC supply of 250 V and have a current rating of 1-60 A. These filters are available in a IP 20 rated chassis mounted package that is ideal for power systems, electronic equipment, medical equipment and electronic data processing equipment applications.

Download Datasheet

Bulk Current Injection Probe for Susceptibility Testing from 10 kHz to 300 MHz

Bulk Current Injection (BCI) Probe from The EMC Shop

The BCIP300M from The EMC Shop is a Bulk Current Injection (BCI) Probe that operates from 10 kHz to 300 MHz. It is designed to inject RF current into cables of electrical equipment and test susceptibility as per IEC 61000-4-6 and MIL-STD-461 standards. This makes the probe ideal for medical, military, and other RF applications.

Download Datasheet

New White Papers & Articles

Amplifier Classification A vs. AB - Exodus Advanced Communications

Passing EMI Compliance Testing the First Time—Part 1: The Physics - Analog Devices

Emi Shielding For Automotive Applications Solution Guide - TE Connectivity

More Whitepapers

Latest News this Week

ETS-Lindgren to Conduct Course on Topics Addressing EMC Fundamentals and MIL-STD-461 Requirements

ETS-Lindgren

Element U.S. Space & Defense Partners with Leonardo DRS on High-Power EMI Test Facility for U.S. Navy

Element U.S. Space & Defense

TU Hamburg Develops Portable Robotic Near-Field Scanner for Electromagnetic Field Measurement

TU Hamburg

Langer EMV-Technik Introduces E2 TS 23 Development System for Pre-Compliance Immunity Testing

Langer EMV-Technik GmbH

MG Chemicals Introduces Water-Based Conductive Paint for EMI Shielding Applications

icotek India

FIEM Industries Commissions EMI/EMC Testing Laboratory at Gurugram R&D Center

FIEM Industries

Astute Secures Southern Europe Rights for Oxley EMI and EMC Product Ranges

Oxley Group

Rohde & Schwarz MXO3 Oscilloscope Evaluated for EMC Measurement Applications

Rohde & Schwarz

IBL-Lab Expands High-Field Immunity Testing Capabilities with New Amplifier Setup

IB-Lenhardt AG

EMC Directory Publishes 2026 Edition of its Print/Digital Magazine for the EMC Industry

EMC Directory

Upcoming Event

EMC & CI 2026

Date: May 19–21, 2026

Location: Newbury, Berkshire

More Events

About EMC Directory

EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.

To unsubscribe please click here

{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Weekly EMC Insights: News, Products and Articles