1. Home
  2. NewsLetters
more
Advertisement
PREV 5 May, 2026 NEXT

EMC Equipment Digest: New and Interesting Products

5 May, 2026 Newsletter - EMC Directory

New and Interesting EMC Products. View it in your browser

New Products Directory News .Whitepapers Articles Calculators Events Webinars
 
Equipment Digest
Date: 5 May, 2026
 
Sponsored by IMS 2026
 
 
New and Interesting Products
EMC Power Amplifiers
2.0 KW Pulsed Solid-State EMC Power Amplifier from 1.0 to 2.5 GHz
EMC Power Amplifiers  from Exodus Advanced Communications
The AMP20202 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 1.0 to 2.5 GHz. It delivers a pulsed output power of more than 2.0 KW and a power gain of more than 63 dB. This amplifier has a pulse width of up to 100 us with up to 6% duty cycle and a PRF of up to 100 kHz.
Download Datasheet Product Details
Anechoic Chamber
Anechoic Chamber with Test Distance of up to 10 m
Anechoic Chamber  from Tekiknow Technologies India Pvt. Ltd.
The TEK-10M SAC from Tekiknow Technologies India Pvt. Ltd is an Anechoic Chamber designed for commercial EMC testing from 9 kHz to 18 GHz. It supports test distances of 1 to 10 m and has quiet zones of 3 to 4 m providing shielding effectiveness of 100 to 110 dB. The walls and ceiling of the test chamber are meticulously outfitted with cutting-edge gapless Hybrid Pyramid absorbers and Ferrite tiles.
Product Details
Shielded Test Enclosure
RF Shielded Chamber from 20 MHz to 12 GHz
Shielded Test Enclosure  from LabiFix Innovations
The LBX-SB200 from LabiFix is an RF Shielded Chamber that covers a frequency range from 20 MHz to 12 GHz. It has an RF absorber lining with a shielding effectiveness (isolation) of over 100 dB and EMI filters on data ports and power lines. This shielded chamber has an RF gasket system and shielded air vents. It measures 75 x 65 x 39 inches (exterior) & 73 x 63 x 37 inches (interior), and is ideal for testing & measuring wireless RF communication devices in Wi-Fi 802.11, Bluetooth, Zigbee, Cellular 4G/5G, WiMax and medical applications.
Download Datasheet Product Details
Coupling Decoupling Network
4-Line Data Line Coupling/Decoupling Network for Surge & EFT Testing up to 2.5 kV
Coupling Decoupling Network  from HILO-Test
The CDN 2410 from HILO-Test is a Coupling-/Decoupling Network that allows superimposition of surge and burst test pulses to up to four I/O signal lines. It has coupling impedances of 0.1 µF, 0.5 µF, or Varistor + 40 O for the surge generator, 33 nF for the burst generator, and four decoupling impedances of 20 mH.
Download Datasheet Product Details
EMC Absorbers
Broadband Hybrid EMC Absorber from 9 kHz to 100 GHz
EMC Absorbers  from Emerson & Cuming Anechoic Chambers
The WAVASORB VHY-30 from Emerson & Cuming Anechoic Chambers is a Hybrid EMC Absorber that operates from 9 kHz to 100 GHz. It is designed for broadband electromagnetic absorption in professional EMC and anechoic test environments with measuring distances of 1 to 10 m. This absorber is based on a hybrid construction that integrates 4 truncated pyramidal absorbers per piece with ferrite tiles, delivering reliable absorption performance across a wide frequency range.
Download Datasheet Product Details
EMC Power Amplifiers
50 W EMC Power Amplifier from 1 to 6000 MHz
EMC Power Amplifiers  from Becker Nachrichtentechnik GmbH
The iAMP1600047-R from Becker Nachrichtentechnik GmbH is an EMC Power Amplifier that operates from 1 to 6000 MHz. It delivers an output power of 50 W (2 channel) and has an integrated CW/pulse generator. This amplifier has an isolation of -78 dB (input) & -130 dB (output), harmonics of less than -25 dBc and non-harmonics of less than -60 dBc.
Download Datasheet Product Details
Sponsored by IMS 2026
IMS 2026 - Register Now
Revolutionizing RF
Join us at the 2026 IEEE International MTT Symposia (IMS2026), 7-12 June in Boston, MA. Step into the future of microwave and RF innovation at the premier destination where the global community comes together to connect, collaborate, and stay ahead of the latest advancements. Click here to learn more.
Absorbing Clamp
Absorbing Clamp from 30 to 200 MHz
Absorbing Clamp  from Schwarzbeck Mess - Elektronik OHG
The CMAD 1614 from Schwarzbeck Mess-Elektronik OHG is an Absorbing Clamp that covers a frequency range of 30 to 200 MHz. It consists of many precision-cut ferrite half-toroids and a unique floating toroid bearing that ensures a perfect fit of the ferrite surfaces. This clamp has two quick-locks on the long side, allowing opening and closing of the clamp within seconds.
Download Datasheet Product Details
EMI Receiver
9 kHz to 6 GHz EMI Receiver for Emission Testing
EMI Receiver  from GAUSS INSTRUMENTS
The TDEMI® X6 from GAUSS INSTRUMENTS is an EMI Receiver that operates from 9 kHz to 6 GHz. It uses analog-to-digital converters with an exceptional ratio of signal-to-noise power density, modern high-speed FPGAs, and in-house designed high-performance microwave circuits to achieve high measurement accuracy and measurement speed.
Download Datasheet Product Details
EMC Antenna
Log Periodic Antenna from 80 to 1000 MHz
EMC Antenna  from Global Engineering Services Corp.
The 1313-2-700M10G from Global Engineering Services Corp. is a Log Periodic Antenna that operates from 80 to 1000 MHz. It can provide a field intensity of up to 220 V/m and has a power gain of 7.5 dBi over isotropic with a front-to-back ratio of more than 15 dB. This antenna has a beamwidth of 60 degrees (E plane) & 105 degrees (H plane).
Download Datasheet Product Details
TEM / GTEM Cell
GTEM Cell from 0.01 to 20 GHz
TEM / GTEM Cell  from GTemCell Group
The GTEM 1250 from GTemCell Group is a GTEM Cell that covers a frequency range of 0.01 to 20 GHz. It is made with 65 cm pyramidal carbon-foam absorbers HPP (RAM) and has a septum height of 1250 mm to handle EUTs of sizes up to 950 x 950 x 700 mm. This GTEM cell can handle an input power of 1.4 kW (continuous) & 2.5 kW (pulsed) and has a VSWR of less than 1.2:1.
Download Datasheet Product Details
Antenna Positioners
Free-Standing Turntable for Anechoic Chambers
Antenna Positioners  from maturo GmbH
The TT 0.8 PF from Maturo GmbH is a Free-Standing Turntable that is designed for anechoic chambers and has a diameter of 0.8 m. It has a load capacity of 100 kg and integral skin-foam sheets made of PVC. This turntable has an adjustable rotating speed of 0.1 to 2.5 rpm and a rotating angle ranging from -200° to 400°. It has a synchronous servo motor and a toothed belt & worm gear turntable driver. This turntable has a LAN (TCP/IP) interface that provides an additional control option for all functions when operated with an FCU3.0 or NCD controller.
Download Datasheet Product Details
EMC / EMI Filter
Power Line EMI Filter from DC to 60 Hz
EMC / EMI Filter  from UEMC
The U82C2x63 from UEMC is a Power Line EMI Filter that operates from 0 to 60 Hz. It has a leakage current of 5.1 A (at 250 VAC, 50 Hz) and an insertion loss of 100 dB (14 kHz to 40 GHz). This filter is rated for an AC voltage of 277 V, a DC voltage of 500 V and has a rated current of 2x 63 A. It is available in a module that measures 920 x 205 x 140 mm and has M6 screw connectors.
Download Datasheet Product Details
Sponsored by IMS 2026
 
 
ESD Simulator
Handheld ESD Simulator from 0.2 kV to 20 kV
ESD Simulator  from 3Ctest
The EDS MAX20 from 3Ctest is a Handheld ESD Simulator that generates electrostatic discharge test voltage of 0.2 kV to 20 kV. It complies with IEC 61000-4-2:2025 and other related standards and supports positive, negative & alternating polarities. This simulator has a voltage resolution of 100 V and a holding time of 5 to 10 seconds. This ESD simulator is designed as a discharge gun for ergonomic handling and has a 3.5-inch color touch screen for simplified control.
Download Datasheet Product Details
EMC Shielded Camera
EMC Shielded Camera with RF Immunity up to 200 V/m
EMC Shielded Camera  from PONTIS EMC
The Cam5 from PONTIS EMC is an EMC Shielded Camera that has RF-immunity of 200 V/m up to 18 GHz and 600 V/m stripline. It is based on PAL-System (color) / NTSC-System (color) video signal technology and has an EXview HAD, CCD image sensor with a resolution of over 550 TV lines.
Download Datasheet Product Details
EMC Pre-Amplifier
Low Noise Preamplifier from 1 to 40 GHz
EMC Pre-Amplifier  from Beijing Daze Technology
The ZN3380A from Beijing Daze Technology is a Low Noise Preamplifier (LNA) that operates from 1 to 40 GHz. It is specifically developed for small signal reception measurements in applications that require wide dynamic range, such as shielding effectiveness testing. This preamplifier provides a gain of 25 dB with a noise figure of less than 2 dB and a minimum detectable level of -127 dBm.
Download Datasheet Product Details
Immunity Test System
Immunity Test Set for Pre-Compliance Testing Applications
Immunity Test System  from Langer EMV-Technik GmbH
The E2 set from Langer EMV-Technik GmbH is an Immunity Test Set that includes EMC tools for pre-compliance immunity testing of assemblies and electronic devices. It includes a TS 23 pulse generator, an S21 optical sensor, optical fiber cable, and various E-field & H-field sources. The pulse generator can produce an adjustable pulse voltage of up to 2.2 kV with a frequency of up to 5 MHz and a pulse width of more than 100 ns.
Download Datasheet Product Details
Magnetic Field Generator
Helmholtz Coil Magnetic Field Generator from DC to 30 MHz
Magnetic Field Generator  from EMCTEST Technologies
The HLM-08 from EMCTEST Technologies is a Helmholtz Coil Magnetic Field Generator that operates from DC to 30 MHz. It produces a magnetic field of up to 2000 Amp/m and up to 20,000 Amp/m (pulsed). This magnetic field generator can handle an input current of 10-15 A and up to 100 A (pulsed 200 ms).
Download Datasheet Product Details
Comb Generator
Battery-Powered Comb Generator from 20 MHz to 4.5 GHz
Comb Generator  from Com-Power Corporation
The CGO-520 from Com-Power Corporation is a Comb Generator that operates from 20 MHz to 4.5 GHz. It produces radiated and conducted reference signals with a frequency step size of 20 MHz and has a frequency stability of 20 ppm. This comb generator has an amplitude stability of ±0.1 dB and a time stability of less than 1 dB over 12 months.
Download Datasheet Product Details
Upcoming Event
Event Image
IMS 2026
Date: 7 to 12 June, 2026
Location: Boston, USA
More Events
About EMC Directory
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.
To unsubscribe please click here{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}
newsletter
Advertisement
True 2026/06_09