Weekly EMC Insights: News, Products and Articles

26 May, 2026 Newsletter - EMC Directory

Latest EMC news & products. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


EMC Insights
Date: 26 May, 2026

Featured Products this Week

Solid-State EMC Power Amplifier from 2 to 18 GHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP20073 from Exodus Advanced Communications is a solid-state high-power EMC power amplifier that operates from 2 to 18 GHz. It delivers a minimum saturated output power of 10 W and a power gain of more than 40 dB with a gain flatness of less than 6 dB p-p . The amplifier uses a Class A/AB linear design and is intended for EMI/RFI testing, CW/Pulse operation, and communication applications.

Download Datasheet Product Details

50/60 Hz Magnetic Field Generator from 1 A/m to 100 A/m

Magnetic Field Generator from Com-Power Corporation

The APF-5060 from Com-Power Corporation is a Magnetic Field Generator that has an output frequency of 50 or 60 Hz. It can generate a magnetic field of strength from 1 A/m to 100 A/m and an output current of 120 A. This generator has a harmonic distortion of less than 8% and a coil factor of 0.01 to 99.99.

Download Datasheet Product Details

Absorbing Clamp from 30 MHz to 1000 MHz

Absorbing Clamp from AMETEK CTS GmbH

The MDS 21B from AMETEK CTS GmbH is an Absorbing Clamp that covers a frequency range of 30 MHz to 1000 MHz. It can handle an input power of up to 5 W for immunity tests and a current of up to 30 A. This absorbing clamp enables the measurement of the interference capability of radio interferers, such as domestic appliances, electric tools etc. directly.

Download Datasheet Product Details

Clamp-On Current Probe from 20 Hz to 50 kHz

Current Probe from EM Antennas

The EM-6980 from EM Antennas is a Clamp-on Current Probe that covers a frequency range from 20 Hz to 50 kHz. It consists of two semicircles that clamp around conductors by means of a clip to measure the conducted current without a direct connection to the circuit under test. It can be connected to a conventional oscilloscope, voltmeter, or interference analyzer using a coaxial cable and has negligible intermodulation effects on the probe outputs.

Download Datasheet Product Details

Pyramidal Horn Antenna from 0.75 to 1.1 GHz

EMC Antenna from Antenna Systems Solutions S.L

The ASY-SGH-007 from ASYSOL is a Pyramidal Horn Antenna that operates from 0.75 to 1.1 GHz. It is designed for use as a reference gain antenna, far-field test range feed, and linearly polarized standard for polarization and channel balance calibration of near-field probes across demanding RF and EMC testing environments.

Download Datasheet Product Details

Sponsored by TÜV SÜD

Accredited EMC testing by TÜV SÜD

Avoid EMC failures, reduce retesting, and accelerate market access. TÜV SÜD provides expert electromagnetic compatibility (EMC) testing, pre-compliance support, and certification services - backed by global accreditation and deep engineering expertise. Click here to learn more.

RF Shielded Enclosure from 20 MHz to 12 GHz

Shielded Test Enclosure from Liveon Technolabs

The LTL B12001 from Liveon Technolabs is an RF Shielded Enclosure that covers a frequency range of 20 MHz to 12 GHz. It has an RF absorber lining for reduced internal reflections and provides a shielding effectiveness of up to 90 dB. This shielded enclosure has a configurable modular I/O interface system and a customizable connector panel configuration with an EMI-shielded ventilation design.

Download Datasheet Product Details

Transient Limiter with Fuse Lamp from DC to 200 MHz

Transient Limiter from The EMC Shop

The DPL200M from The EMC Shop is a Transient Limiter that operates from DC to 200 MHz. It has a built-in 20 dB attenuator and a fuse lamp to protect equipment when measuring high-energy spectra. This limiter protects the receiver input from excessive disturbance levels of more than 100 dBµV, whilst smaller levels can pass with a fixed attenuation of 20 dB to the receiver input.

Download Datasheet Product Details

ESD Simulator from 5 V to 8 kV

ESD Simulator from Electro-Tech Systems

The Model 9910 PinPulse from Electro-Tech Systems is an ESD Simulator that generates parasitic-free waveforms over a voltage range of 5 V to 8 kV. It supports 3 built-in ESD models: HBM, HMM & MM and has programmable polarity and voltage stepping. This simulator can serve as a manual two-point ESD simulator ideal for low pin count devices and generates all waveforms in compliance with current JEDEC & ESDA standards.

Download Datasheet Product Details

Military-Grade Passive USB EMI Filter from 700 MHz to 40 GHz

EMC / EMI Filter from DJM Electronics

The Pasif USB 2.0 from DJM Electronics is a Passive USB EMI Filter designed to provide essential protection in secure systems that comply with Intelligence Community Directive 705 (ICD 705). It passes signals at Low Speed (LS - 1.5 Mb/s), Fast Speed (FS - 12 Mb/s), and High Speed (HS - 480 Mb/s) while simultaneously blocking all unwanted signals at better than 80 dB starting from 700 MHz (and better than 90 dB starting at 750 MHz) up to 40 GHz.

Download Datasheet Product Details

Comb Generator from 1 to 18 GHz

Comb Generator from Global Engineering Services Corp.

The 1313-C250M18G from Ge-EMC is a Comb Generator that operates as a radiation reference signal source with a frequency range of 1 to 18 GHz at 250 MHz intervals. It has a frequency stability of 20 ppm and an amplitude stability of ± 0.1 dB. This comb generator is equipped with an integrated biconical antenna up to 18 GHz and is designed for routine on-site inspections, which can be performed in just a few minutes by reading several selected output frequencies and comparing the readings with reference data.

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Weekly EMC Insights: News, Products and Articles