| New and Interesting Products |
|
|
| Solid State Power Amplifier from 150 to 400 MHz | |
EMC Power Amplifiers
from Exodus Advanced Communications
|
| The AMP20203 from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 150 to 400 MHz. It delivers a pulsed output power of more than 5000 W (pulse width up to 1 ms and 6% duty cycle) and a power gain of more than 67 dB. This amplifier is based on Class AB linear advanced technology and provides instantaneous bandwidth with high efficiency, exceptional reliability, and ruggedness. |
| Download Datasheet |
|
|
|
|
| Coupling Decoupling Network for Surge Combination Wave, Ring Wave and EFT/Burst | |
Coupling Decoupling Network
from PFIFFNER Systems
|
| The FP-COMB 63/1500-1 from PFIFFNER Systems is a Coupling Decoupling Network (CDN) that is designed for Surge Combination Wave, Ring Wave and EFT/Burst applications. It reduces residual voltage levels by integrating the proper decoupling inductors for each type of CDN application in order to meet the requirements (with regard to voltage drop at the rated current). |
| Download Datasheet |
|
|
|
|
| Spherical E-field Probe from 9 kHz to 10 GHz | |
EMF Meter and Probe
from Raditeq
|
| The RS2010M from Raditeq is an E-field Probe that covers a frequency range of 9 kHz to 10 GHz. It can measure field intensity of 0.1 to 500 V/m with a resolution of 0.01 V/m and can conduct up to 100 measurements per second. This probe uses dedicated hardware filtering, making it capable of accurately measuring E-field test levels that use a 1 kHz pulse modulated signal, as specified in the international defense standard MIL-STD-461G (RS103) and Aerospace DO-160G standard (Section 20). |
| Download Datasheet |
|
|
|
|
| Reverberation Chambers for Measurements from 200 MHz to 18 GHz | |
Reverberation Chamber
from ETS-Lindgren
|
| The SMART 200 Series from ETS-Lindgren are Reverberation Chambers that are designed for precise RF immunity testing of automotive components, test labs, and product development environments. They have a measurement frequency range of 200 MHz to 18 GHz and have an installed tuner that provides an isotropic and homogeneous test environment, meeting the field uniformity requirements of the ISO 11452-11 and other industry and OEM standards. |
| Download Datasheet |
|
|
|
|
| Quad-Channel RF Power Meter from 10 MHz to 50 GHz | |
Power Meter
from Anritsu
|
| The ML2439A from Anritsu is a Quad-Channel RF Power Meter that covers a frequency range of 10 MHz to 50 GHz. It is designed to accept input from Anritsu’s USB power sensors and measure, process, and display peak/average (CW and RMS) power values of RF signals. This power meter has a video bandwidth of 195 MHz, allowing it to capture and measure the RF power of very narrow pulse-modulated and wideband periodic-modulated signals. |
| Download Datasheet |
|
|
|
|
| Spectrum Analyzer from 9 kHz to 1.8 GHz | |
Spectrum Analyzer
from Good Will Instrument Co., Ltd.
|
| The GSP-8180 from Good Will Instrument Co., Ltd. (GW Instek) is a Spectrum Analyzer that operates from 9 kHz to 1.8 GHz. It is a general-purpose spectrum analyzer designed to provide wideband spectrum analysis for various test and measurement environments. This spectrum analyzer has a pre-amplifier along with an optional EMI filter and a tracking generator that improve spectral purity over the frequency range. |
| Download Datasheet |
|
|
|
| Sponsored by TÜV SÜD | | Accredited EMC testing by TÜV SÜD | | Avoid EMC failures, reduce retesting, and accelerate market access. TÜV SÜD provides expert electromagnetic compatibility (EMC) testing, pre-compliance support, and certification services - backed by global accreditation and deep engineering expertise. Click here to learn more. | | | |
|
|
| EMC Pre-Amplifier from 1 kHz to 18 GHz | |
EMC Pre-Amplifier
from Beijing Daze Technology
|
| The ZN3380C from Beijing Daze Technology is an EMC Pre-Amplifier that operates from 1 kHz to 18 GHz. It delivers a gain of up to 30 dB and can detect signals as low as -127 dBm. This preamplifier requires an AC supply of 220 V and consumes less than 10 W of power. It is available in an enclosure that measures 145 x 90 x 240 mm and is ideal for applications requiring wide dynamic range, such as shielding effectiveness testing. |
| Download Datasheet |
|
|
|
|
| Bulk Current Injection Probe 1 MHz to 400 MHz | |
Bulk Current Injection (BCI) Probe
from TEKBOX Digital Solutions
|
| The TBBCI1-800K420 from TEKBOX Digital Solutions is a Bulk Current Injection Probe designed primarily for conducted immunity testing of automotive products in the frequency range of 1 MHz to 400 MHz. It has an insertion loss of 5 dB compliant with ISO 11452-4; IEC / EN 61000-4-6 specification, and a typical transfer impedance of 29 dB Ohm. |
| Download Datasheet |
|
|
|
|
| 2-Channel Signal Generator and Frequency Counter up to 60 MHz | |
EMI Signal Generator
from JOY-iT
|
| The JT-JDS6600 from JOY-iT is a Signal Generator and Frequency Counter that operates up to 60 MHz. It is a 2-channel signal generator and a 1-channel frequency counter with a storage of up to 60 groups of any waves. The signal generator can produce sine wave output of up to 60 MHz, rectangular and triangle wave output up to 15 MHz, and PWM, CMOS, TTL, and arbitrary output up to 6 MHz. |
| Download Datasheet |
|
|
|
|
| Single-Phase EMI Filter from 0.01 to 10 MHz | |
EMC / EMI Filter
from Captor Corporation
|
| The A-10900-05 from Captor Corporation is a Single-Phase EMI Filter that operates from 0.01 to 10 MHz. It has an attenuation of up to 80 dB (0-60 Hz and 400 Hz applications) and a current rating of 5 A with a voltage rating of 250 V (AC) and 600 V (DC). This filter is designed to mitigate conducted emissions as specified in the MIL-STD-461 CE102 requirements. |
| Download Datasheet |
|
|
|
|
| Single-path AMN (LISN) from 0.1 to 150 MHz | |
Line Impedance Stabilization Network
from Schwarzbeck Mess - Elektronik OHG
|
| The NNHV 8123R from Schwarzbeck Mess - Elektronik OHG is a Single-path AMN (artificial mains network) (LISN) that operates from 0.1 to 150 MHz. It drains a continuous current of up to 70 A (up to 100 A for a limited time) and a maximum voltage of up to 1000 V (DC) and up to 700 V (AC 50/60 Hz) or 300 V (AC 400 Hz). |
| Download Datasheet |
|
|
|
|
| EMC Horn Antenna from 2.0 to 18.0 GHz | |
EMC Antenna
from NSI-MI Technologies
|
| The ANT-BHA-2-18 from NSI-MI Technologies is an EMC Horn Antenna that operates from 2.0 to 18.0 GHz. It has a peak gain of 15 dBi and a port-to-port isolation of 25 dB. This antenna has a dual-linear polarization and a cross-polar discrimination of 20 dB. It can handle an input power of up to 25 W and has a VSWR of 1.8:1. |
| Download Datasheet |
|
|
|
|
|
|
| 60 W EMC Power Amplifier from 1000 to 6000 MHz | |
EMC Power Amplifiers
from Vectawave Technology
|
| The VBA1060-60 from Vectawave Technology is an EMC Power Amplifier that operates from 1000 to 6000 MHz. It delivers an output power of 60 W and a gain of more than 49 dB. This rugged Class A mismatch-tolerant amplifier is based on high-performance extra-wideband GaN output stages and utilizes Vectawave's proprietary Quadrature Hybrid combining techniques, minimizing loss for a more efficient solution. |
| Download Datasheet |
|
|
|
|
| Compact Hybrid Anechoic Chamber from 9 kHz/30 MHz to 18 GHz | |
Anechoic Chamber
from GTemCell Group
|
| The CHC from GTemCell Group is a Compact Hybrid Anechoic Chamber that covers a frequency range of 9 kHz/30 MHz to 18 GHz. It has a measuring distance of 3.0 m and is suitable for pre-compliance emission measurements (EMI) according to CISPR 16-1-4. This anechoic chamber has a lining of F006 ferrite absorbers and partially of hybrid absorbers and is delivered optionally as a semi-anechoic chamber (with ground plane) or as a fully anechoic chamber (floor absorbers on the whole floor surface). |
| Download Datasheet |
|
|
|
|
| Reverberation Chamber from 10 kHz to 40 GHz | |
Reverberation Chamber
from Frankonia Germany EMC Solutions GmbH
|
| The RVC M from Frankonia Germany EMC Solutions GmbH is a Reverberation Chamber that operates from 10 kHz to 18 or 40 GHz. It has a Lowest Usable Frequency (LUF) of 200 MHz at a working distance of more than 400 mm, complying with IEC/EN 61000-4-21 and ISO 11452-11 standards. This chamber has a vertically oriented Z-Fold stirrer with a stirring speed of up to 260 RPM. |
| Download Datasheet |
|
|
|
|
| RF Shielded Test Enclosure from 20 MHz to 12 GHz | |
Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX6600 from Labifix is an RF Shielded Test Enclosure that operates from 20 MHz to 12 GHz. It is designed for wireless device testing and RF isolation applications. It is developed for testing Wi-Fi (All 802.11 series), Bluetooth, Zigbee, WiMAX, LTE, 4G, and 5G devices in a controlled environment free from external interference. |
| Download Datasheet |
|
|
|
|
| Clamp-on Current Probe from 1 kHz to 200 MHz | |
Current Probe
from Solar Electronics Company
|
| The 9124-1N from Solar Electronics Company is a Clamp-on Current Probe that covers a frequency range of 1 kHz to 200 MHz. It can handle a current of up to 200 A (AC, 0 to 60 Hz) and 70 A (AC, 400 Hz) and a peak pulse current of up to 5000 A. This probe has a window diameter of 32 mm (1.25”) for the insertion of the conductor. |
| Download Datasheet |
|
|
|
|
| Log Periodic Antenna from 200 MHz to 3 GHz | |
EMC Antenna
from Global Engineering Services Corp.
|
| The OLP-230 from Global Engineering Services Corp. is a Log Periodic Antenna that operates from 200 MHz to 3 GHz. It has a gain of 6.7 dBi and a VSWR of less than 2.0:1. This antenna minimizes signal reflections and reduces power loss to ensure that transmitted power is effectively utilized, thereby maximizing overall system performance. |
| Download Datasheet |
|
|
|
|
| Spectrum Analyzer from 9 kHz to 1.5 GHz | |
Spectrum Analyzer
from Lisun Group
|
| The SPA-1P5G from Lisun Group is a Spectrum Analyzer that covers a frequency range of 9 kHz to 1.5 GHz. It has a frequency resolution of 1 Hz and an amplitude measurement range of DANL to +20 dBm. This spectrum analyzer has a 20 dB preamplifier and an input attenuator that provides an attenuation of 0-40 dB in 1 dB steps. |
| Download Datasheet |
|
|
|
|
| Tempest Power Line Filter from 100 kHz to 1 GHz | |
EMC / EMI Filter
from EMC Electronic
|
| The TGH-16 from EMC Electronic is a Tempest Power Line Filter that operates from 100 kHz to 1 GHz. It has an attenuation of 60 dB tested as per MIL-STD-220 standard. This filter is rated for an AC voltage of 230 V (50/60 Hz) and a current of 16 A. It is available in an enclosure that measures 440 x 105 x 50 mm. |
| Download Datasheet |
|
|
|
|
| Antenna Tripod Stand for Radiated Emissions Pre-Compliance/Compliance Testing | |
Antenna Positioners
from Com-Power Corporation
|
| The AT-220 from COM-POWER is an Antenna Tripod Stand designed for EMI/EMC radiated emissions pre-compliance and compliance testing. It is manufactured using a heavy-duty, non-reflective Nylon material that helps minimize interference in test environments. This tripod stand primarily supports installation of the AH-220 double-ridged horn, AM-741R active monopole, and AL-130R active loop antenna in laboratories. |
| Download Datasheet |
|
|
|
|
| Average CW Power Meter from DC to 220 GHz for RF & Microwave Test Applications | |
Power Meter
from Keysight Technologies
|
| The N1913B from Keysight Technologies is an Average Power Meter that operates from DC to 220 GHz (sensor dependent). It is designed to deliver accurate average power measurements for continuous wave (CW) signals in RF and microwave test applications. This power meter supports one measurement channel, which can be expanded to three channels by connecting compatible USB power sensors, enabling simultaneous multi-channel power measurements. |
| Download Datasheet |
|
|
|
|
| IC-Stripline TEM Cell from DC to 10 GHz | |
TEM / GTEM Cell
from ESDEMC Technology
|
| The EM601-10 from ESDEMC Technology is an IC-Stripline TEM Cell that operates from DC to 10 GHz. It generates an electromagnetic field for testing small devices such as ICs, wireless communication modules, etc. This TEM cell can generate an E-field strength of up to 12.5 kV/m (at 200 W-rms) and up to 125 kV/m (at 1 kV pulse) and an H-field strength of up to 377 A/m when an external test signal is applied through its input port. |
| Download Datasheet |
|
|
|
|
| Gun-Style ESD Simulator from ±100 to ±26000V | |
ESD Simulator
from Electro-Tech Systems
|
| The 930D from Electro-Tech Systems is a Gun-Style ESD Simulator that produces electrostatic discharge voltage from ±100 to ±26000 V. It consists of a control unit and a discharge (gun) unit connected by a detachable 10-ft cable. The control unit houses the low-voltage power supply with LED status indicators, system timing electronics, 0.5-inch LED voltage display, and controls for the AUTO MODE event counter and high-voltage power supply. |
| Download Datasheet |
|
|
|
|
| Comb Generator from 50 kHz to 30 MHz and 10/100 MHz to 7.5 GHz | |
Comb Generator
from EMC Instruments
|
| The CG50L10100R from EMC Instruments is a Conducted Comb Generator that operates from 50 kHz to 30 MHz (AC/DC LISN) and 10/100 MHz to 7.5 GHz (RE). It serves as a signal source for conducted emissions testing of LISNs and radiated emission measurements in EMI chambers. This comb generator has a frequency step size of 50/500 kHz (AC/DC) and 10/100 MHz (RE). |
| Download Datasheet |
|
|
Please wait...