Weekly EMC Insights: News, Products and Articles

12 May, 2026 Newsletter - EMC Directory

Latest EMC news & products. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


EMC Insights
Date: 12 May, 2026

Sponsored by Exodus Advanced Communications

Featured Products this Week

Solid-State EMC Power Amplifier from 1 to 1000 MHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP20126 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 1 to 1000 MHz. It delivers a saturated output power of more than 200 W and a power gain of more than 53 dB. This amplifier is based on a Class A/AB linear design and delivers exceptional efficiency, reliability, and ruggedness. It has an input return loss of less than -10 dB and a 2-tone intermodulation (IMD) of -30 dBc.

Download Datasheet

Real-Time Spectrum Analyzers from 9 kHz to 6.5 GHz

Spectrum Analyzer from Rigol Technologies

The RSA5000 Series are Real-Time Spectrum Analyzers that cover a frequency range from 9 kHz to 3.2 or 6.5 GHz. They are based on Ultra Real Technology that enables a real-time bandwidth of 40 MHz and a resolution bandwidth down to 100 kHz. These spectrum analyzers have a displayed average noise level (DANL) better than -165 dBm/Hz and a phase noise of -108 dBc/Hz.

Download Datasheet

Ultra Low Phase Noise EMC Pre-Amplifiers from 10 MHz to 6 GHz

EMC Pre-Amplifier from Maury Microwave

The HX2600 Series from Maury Microwave are EMC Pre-Amplifiers that operate from 10 MHz to 6 GHz. They have an ultra-low phase noise of less than -175 dBc/Hz and are designed for phase noise measurements of devices with low output power. These amplifiers have an output P1dB of +15 dBm and a gain of 11 dB.

Download Datasheet

Coupling Decoupling Network from 150 Hz to 230 MHz

Coupling Decoupling Network from Schwarzbeck Mess - Elektronik OHG

The CDN M1 16A 1000V from Schwarzbeck Mess-Elektronik OHG is a Coupling Decoupling Network (CDN) that operates from 150 Hz to 230 MHz. It is designed to inject common-mode disturbance signals into unscreened AC and DC power supply lines (mains) to facilitate conducted immunity testing as per the IEC 61000-4-6 standard.

Download Datasheet

Active Receiving Dipole Antenna from 20 MHz to 500 MHz

EMC Antenna from Rohde & Schwarz

The R&S®HE302 from Rohde & Schwarz is an Active Receiving Dipole Antenna that covers a frequency range of 20 MHz to 500 MHz. It can withstand a destructive field strength of over 30 V/m and has a noise figure of less than 29 dB. This antenna has linear polarization and a VSWR of less than 2.5:1.

Download Datasheet

Sponsored by Exodus Advanced Communications

Exodus AMP10112 - Broadband Solid State Amplifier

Exodus AMP10112: 0.4–6.0 GHz, 40 W, Broadband Solid State Amplifier

Exodus AMP10112 is a Class AB GaN SSPA covering 0.4–6.0 GHz with 40 W output and 46 dB gain. Designed for EMC, EMI/RFI, and lab applications, it offers wide bandwidth, stable performance, and built-in protection in a compact, rugged design. Click here to learn more.

Boresight Tower Antenna Positioner with Scan Range of 1 to 4 m

Antenna Positioners from ETS-Lindgren

The 2171C from ETS-Lindgren is a Boresight Tower Antenna Positioner that enables precise, configurable boresighting and non-boresighted positioning for EMC antennas. It has a dual-belt drive system that allows full configurability of boresight angles, ensuring precise alignment for accurate and repeatable results, and is compliant with ANSI C63.4, C63.10, C63.26, and CISPR 16 requirements.

Download Datasheet

Pyramid EMC Absorber from 0.5 to 100 GHz

EMC Absorbers from Holland Shielding Systems

The 3690-300 from Holland Shielding Systems is a Pyramid EMC Absorber that operates from 0.5 to 100 GHz. It is made of a microporous material to improve its power handling capacity and can withstand power irradiation (continuous wave) of 8 to 10 kW/m2. This material also supports inside and outside ventilation circulation and has good flame-retardant characteristics, having an oxygen index of more than 60% and a flame-retardant B1 level.

Download Datasheet

25, 50, 100, 150, or 250 MHz Arbitrary Function Generators

EMI Signal Generator from Tektronix, Inc.

The AFG31000 Series from Tektronix are Arbitrary Function Generators that operate at 25, 50, 100, 150, or 250 MHz. They support multiple built-in waveforms, including sine, square, ramp, pulse, noise, & other frequently used waveforms, and have a sample rate of 250 MSa/s, 1 GSa/s, or 2 GSa/s. These generators have a 14-bit vertical resolution and operate in sweep, burst, and modulation modes (AM, FM, PM, FSK, and PWM).

Download Datasheet

Open-Ended Waveguide Probe from 0.75 to 1.15 GHz

Near Field Probe from Lorentz EM Technology Co., Ltd.

The ANTP01-0009N-X-111 from LoRentz is an Open-Ended Waveguide Probe that operates from 0.75 to 1.15 GHz. It is designed to sample the radiated electromagnetic field of an antenna under test with lower interference between the probe and AUT. This probe has exceptional linear polarization purity, long-term stability & repeatability and a VSWR of less than 2.2:1.

Download Datasheet

EMI Filters from 100 kHz to 100 MHz

EMC / EMI Filter from EMCIS

The MC2 Series from EMCIS are Power Line EMI Filters that operate from 100 kHz to 100 MHz. They provide an attenuation of 30-80 dB and are rated for 250 VAC & 10-30 A of current. These filters are available in a module that measures 170 x 120 x 70 mm and are ideal for standard, industrial, and military applications.

Download Datasheet

New White Papers & Articles

The Importance of EMC Compliance and Understanding EMC Standards in Automotive Development - TÜV SÜD America Inc.

Amplifier Classification A vs. AB - Exodus Advanced Communications

Spectrum Analyzer Based Phase Measurement for Near-Field EMI Scanning - Amber Precision Instruments

More Whitepapers

Sponsored by Exodus Advanced Communications

Exodus AMP20188: 4.0–8.0 GHz, 200 W High-Power SSPA, TWT Replacement

Exodus AMP20188 is a broadband solid state power amplifier operating from 4.0–8.0 GHz, delivering 200 W output with 53 dB gain. Designed for EMI/RFI, CW and pulsed, and lab applications, it offers reliable performance with monitoring and protection. Click here to learn more.

Latest News this Week

EMIS Introduces MRI Filter for High-Field Systems and Imaging Applications with Suppression up to 10GHz

EMIS

GAUSS INSTRUMENTS Introduces Ultra-High Resolution Persistence Mode for TDEMI Ultimate and TDEMI ULTRA

GAUSS INSTRUMENTS

ETS-Lindgren to Participate in IEEE EMC MiniSymposium and EMC Fest 2026

ETS-Lindgren

Rohde & Schwarz Expands Broadband Amplifier Range to 1000 W for EMC Testing

Rohde & Schwarz

UL Solutions Starts Construction of EMC and Wireless Testing Lab in Germany

UL Solutions

CSA Group Opens Automotive EMC Testing Laboratory in South Korea

CSA Group

Element Announces Expansion of Huntsville Lab, Establishing it as an Innovation Hub

Element Materials Technology

Intertek Announces Opening of its First EMC Testing Lab in Bengaluru, India

Intertek

Metrosert Establishes EMC and Radar Testing Laboratory for Drone and Defence Systems

Metrosert

Saelig Introduces Harogic PXN Series Handheld Spectrum Analyzers up to 9GHz

Saelig

IIT Kanpur Sets Up Facility to Test Defence Equipment and UAV Systems

IIT Kanpur

ETS-Lindgren to Hold TILE! Users Group – Basics Workshop Annually Starting 2026

ETS-Lindgren

Upcoming Event

ACES 2026

Date: 24 to 27 May, 2026

Location: Thessaloniki, Greece

More Events

About EMC Directory

EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.

To unsubscribe please click here

{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Weekly EMC Insights: News, Products and Articles