Weekly EMC Insights: News, Products and Articles

17 Feb, 2026 Newsletter - EMC Directory

Top news & products. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


EMC Insights
Date: 17 Feb, 2026

Sponsored by Exodus Advanced Communications

Featured Products this Week

Solid-State EMC Power Amplifier from 0.5 to 6 GHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP20110 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 0.5 to 6 GHz, covering P, L, and S-Bands. It delivers a saturated output power of 150 W with a power gain of more than 53 dB. This power amplifier features a Class A/AB GaN linear design using high-power devices to deliver ultra-wide instantaneous bandwidth, high efficiency, and reliable, rugged performance.

Download Datasheet Product Details

EMC Antenna Kit from 30 MHz to 18 GHz

EMC Antenna Kit from Narda Safety Test Solutions

The AS-05 from Narda Safety Test Solutions is an EMC Antenna Kit that covers a frequency range of 30 MHz to 18 GHz. It includes a BC-01 Biconical Dipole, LP-04 Log Periodic Dipole Array and a DR-01 Double Ridged Horn Antenna designed for radiated emissions and immunity testing that can be used in conjunction with any receiver or spectrum analyzer.

Download Datasheet Product Details

Shielded OTA Reverberation Test Chamber from 5 to 140 GHz

Reverberation Chamber from Antennex B.V

The RC-01-0202 from ANTENNEX BV is a Shielded Over-The-Air (OTA) Reverberation Chamber that operates from 5 to 170 GHz. It is designed for accurate testing of power-related metrics (TRP, Efficiency, Gain, Noise Figure, and FMCW). This test chamber can measure a Device Under Test (DUT) with maximum dimensions of 300 x 300 x 300 mm and includes two mode-stirring mechanisms.

Download Datasheet Product Details

Rod Antenna for E-Field Measurements from 9 kHz to 30 MHz

EMC Antenna from EMC Electronic

The RA10K30M from EMC Electronic is a Rod Antenna that operates from 9 kHz to 30 MHz. It is designed for low-frequency E-field generation and measurement in EMC test laboratories. This antenna consists of a 104 cm rod and an impedance-matching amplifier with optional ground plane, calibration adapter, and bonding kits.

Download Datasheet Product Details

ESD Test Simulator with a Discharge Voltage of 16/30 kV

ESD Simulator from Laplace Instruments

The ONYX16 from Laplace Instruments is an Electrostatic Discharge (ESD) Test Simulator that generates a discharge voltage of 16/30 kV. It consists of modular RC units, a multilingual interface, remote control software, a built-in LED light, and temperature & humidity displays. This ESD simulator’s built-in interfaces allow for trouble-free use across all types of test sites.

Download Datasheet Product Details

E-Field Generator from 10 kHz to 30 MHz

E-Field Generator from Lorentz EM Technology Co., Ltd.

The LRET-10K30M-F1 from Lorentz EM Technology Co., Ltd. is an E-Field Generator that operates from 10 kHz to 30 MHz. It can handle an input power of up to 3000 W and has a VSWR of less than 3.0:1. This E-field generator produces a field strength of up to 200 V/m and has vertical polarization. It meets test requirements under MIL-STD-461 / GJB 151 standards.

Download Datasheet Product Details

Sponsored by Exodus Advanced Communications

Exodus Advanced Communications - AMP20085

1.0-10.0GHz Wideband Solid-State Amplifier with Intelligent Monitoring

Exodus AMP20085 is a rugged Class A/AB solid-state amplifier delivering 100 W minimum across 1.0–10.0 GHz. It offers 50 dB gain and monitoring for forward/reflected power, VSWR, voltage, current, and temperature in a compact 5U, 30 kg chassis. Click here to learn more.

Robotic Arm Near-Field Probe Covering Frequencies up to 18 GHz

Near Field Probe from Y.I.C. Technologies

The EMProbeE6 from Y.I.C. Technologies is a Near-Field Probe that covers a frequency range of up to 18 GHz. It is equipped with a computer-controlled 6-axis robotic arm and uses 3D precision technology for pre- and post-EMC compliance testing. This probe has a resolution of 7.5 to 0.2 mm and a scan area radius of 450 mm.

Download Datasheet Product Details

High Pass Filter for Interference Suppression from 9 kHz to 250 MHz

EMC / EMI Filter from MTS Systemtechnik GmbH

The MTA-HPF-150 from MTS Systemtechnik GmbH is a High Pass Filter (HPF) that operates from 9 kHz to 250 MHz. It has a passband insertion loss of less than 0.9 dB with a ripple of up to 0.5 dB. This filter utilizes 5-Pole Chebyshev filtering technology. This device can be connected between a line impedance stabilization network (LISN) equipment and a test receiver to prevent disturbing signals below 150 kHz, enabling accurate and repeatable measurements.

Download Datasheet Product Details

Diode Pulse Limiter with 10 dB Attenuation from DC to 200 MHz

Transient Limiter from Schwarzbeck Mess - Elektronik OHG

The VTSD 9561 F from Schwarzbeck Mess - Elektronik OHG is a Diode Pulse Limiter that operates from DC to 200 MHz. It consists of a high-power attenuator along with an Osram 2306 fuse lamp that protects sensitive equipments when measuring spectra with high energy. The fuse lamp allows users to recognize over-load conditions quickly and reliably, thereby preventing possible damage.

Download Datasheet Product Details

EMI Test Receiver from 1 kHz to 3.6 GHz

EMI Receiver from Saluki Technology Inc.

The SER3600 from Saluki Technology Inc. is an EMI Test Receiver that operates from 1 kHz to 3.6 GHz. The whole system is equipped with a spectrum analysis module and a tracking signal generator to meet the testing needs of users in different fields. It has a resolution bandwidth of 200 Hz, 9 kHz, 120 kHz, or 1 MHz and an amplitude accuracy of ±2.0 dB in EMI receiving mode.

Download Datasheet Product Details

New White Papers & Articles

Biomedical Applications & EM Exposure - EMWorks, Inc.

Broadband RF Amplifiers in EMC Immunity Testing - Rohde & Schwarz

Advantages of GaN RF Amplifiers with High Peak-to-Average Capability to P1dB Rated Amplifiers - Exodus Advanced Communications

More Whitepapers

Sponsored by Exodus Advanced Communications

Exodus Advanced Communication - AMP20097

4.0-8.0GHz, 2KW Solid State C-Band Pulse Amplifier

Exodus AMP20097 is a 4.0–8.0 GHz, 2 kW solid-state C-Band pulse amplifier for Radar, HIRF, and EMC/EMI Mil-Std 461/464. It delivers superb pulse fidelity, 100 µsec pulse widths, 10% duty cycles, 63 dB gain, and full monitoring in a rugged 7U chassis. Click here to learn more.

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Weekly EMC Insights: News, Products and Articles