| Top EMC Equipment of 2025 |
|
|
| 400 W Solid-State EMC Power Amplifier from 1 to 2.5 GHz | |
EMC Power Amplifiers
from Exodus Advanced Communications
|
| The AMP20089 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of 400 W (CW/Pulsed) with a gain of over 56 dB. This SSPA is based on the Class A/AB linear amplifier design that achieves high efficiency with unprecedented reliability and ruggedness. |
|
Download Datasheet
Product Details | |
|
|
|
| Solid-State Power Amplifier (SSPA) from 6.0 to 18 GHz | |
EMC Power Amplifiers
from Ophir RF
|
| The 4151 from Ophir RF is a 250 W Solid-State Power Amplifier (SSPA) that operates from 6.0 to 18 GHz. It delivers a saturated output power of 250 W with a small signal gain of more than 54 dB and supports CW/AM/FM/PM/Pulse input signal formats. It has a P1 power of 80 W, an IP3 of 58 dBm, harmonics of -20 dBc, and a spurious of -60 dBc. |
|
Download Datasheet
Product Details | |
|
|
|
| 50 W, Solid-State Amplifier from 6 to 18 GHz | |
EMC Power Amplifiers
from Rohde & Schwarz
|
| The R&S®BBA300-FG50 from Rohde & Schwarz is a Solid-State Amplifier that operates from 6 to 18 GHz. It delivers a nominal output power of 50 W and a nominal power gain of 47 dB (@1 GHz) with gain flatness of up to +/- 3 dB. This amplifier is designed with spurious emissions of better than -80 dBc and harmonics of -20 dBc. It has a noise figure of 13 dB and a noise power density of -110 dBm. |
|
Download Datasheet
Product Details | |
|
|
|
| Fully Automated Turntable for EMC Testing | |
Antenna Positioners
from Com-Power Corporation
|
| The TTW-400 from Com-Power Corporation is a Fully Automated Turntable with a RPM of 2:1. It has a table diameter of 1.2 meters and a nominal table height of 23 cm. This motorized fully automated turntable positioner can be rotated clockwise or counterclockwise using the reversing drum remote switch and supports extension cable (3-meter cable) controller interface. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| CISPR-16-1-1 Compliant Dual-Channel EMI Receiver | |
EMI Receiver
from EMZER Technological Solutions
|
| The EMSCOPE from EMZER Technological Solutions is an EMI Receiver that operates from 9 kHz to 30 MHz. It is designed according to CISPR-16-1-1 and CISPR 16-1-2 and offers comprehensive measurement capabilities for common and differential mode conducted emissions. This receiver combines two simultaneous EMI Receivers, each equipped with peak, quasi-peak, and average detectors, and also, includes two transient limiters. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
| E/H Field Generator from 10 kHz to 100 MHz | |
E-Field Generator
from AR RF/Microwave Instrumentation
|
| The ATP10K100M from AR RF is an E/H Field Generator that produces both E (electric) and H (magnetic) fields. It has a field strength of up to 800 V/m over a frequency range of 10 kHz to 100 MHz. This field generator can handle an input CW power of up to 3000 W and has a VSWR of less than 2.0:1. This field generator is very flexible as it can be rotated and the height adjusted to accommodate the unit under test. |
|
Download Datasheet
Product Details | |
|
|
|
| Automotive EMC Testing Anechoic Chamber | |
Anechoic Chamber
from Tekiknow Technologies India Pvt. Ltd.
|
| The TEK-CISPR 12 Chamber from Tekiknow Technologies India Pvt. Ltd. is an Anechoic Chamber operating at frequencies from 9 kHz to 18 GHz. It evaluates the electromagnetic compatibility (EMC) of automotive components and systems, meeting the stringent requirements of CISPR 12, which governs the assessment of radio disturbances in vehicles, boats, and electrical devices. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| MIL Qualified Power Supply Protection Filter | |
EMC / EMI Filter
from Exxelia
|
| The BCC from Exxelia is a MIL Qualified Power Supply Protection Filter for Anechoic Chambers, Faraday Cages, and Shelters. It has a current rating of up to 800 A and a voltage rating of 28 - 400 V. This filter has DC protection with an insertion loss of up to 100 dB (at 10 kHz). It has an asymmetric design with single line protection and has zoning and feedthrough mounting. |
|
Download Datasheet
Product Details | |
|
|
|
| Compact 30 kV ESD Simulator with Touchscreen Control | |
ESD Simulator
from 3Ctest
|
| The EDS MAX30 from 3Ctest is a high-performance ESD Simulator that generates electrostatic discharge of up to 30 kV. It complies with ISO 10605, GB/T 19951, IEC 61000-4-2, and related standards. This simulator provides a voltage range of 0.2 kV to 30 kV (±5%) with 100 V resolution and a maintained time of 5 to 10 seconds. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
| Modular Handheld ESD Generator up to 30kV | |
ESD Simulator
from EMC PARTNER AG
|
| The ESD3000 by EMC Partner is an ESD Generator with a fully portable construction with no additional basic unit requirement. It includes an LCD control panel with 6 menu buttons,1 trigger button, and a holding time of more than 5 s. The generator supports a maximum voltage of 16 kV or 30 kV, depending on the chosen modules, with voltage steps of 100 V for testing. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Direct Power Injection Immunity Testing System | |
Immunity Test System
from Noise Ken
|
| The DPI (Direct Power Injection) Immunity Testing System from Noise Ken is for evaluating semiconductor IC immunity. This IEC 62132-4 compliant system enables automated testing by directly injecting RF interference power into the IC power supply and performing real-time malfunction judgments based on IEC 62132-1 classifications. This has operating frequency of 150 kHz to 1000 MHz and a power level from 10 dBm to 37 dBm. |
|
Download Datasheet
Product Details | |
|
|
|
| Immunity Test System from 80 MHz to 6 GHz | |
Immunity Test System
from Rohde & Schwarz
|
| The R&S®TS9981C from Rohde & Schwarz is an Immunity Test System with a frequency range of 80 MHz to 6 GHz and a field strength of 10 V/m (+ 80 % AM or higher). It has a test distance of up to 3 m and supports CW, AM, FM, fM, and PM modulations. This immunity test system consists of a signal generator of up to 6 GHz, a broadband amplifier system of 80 MHz to 6 GHz, a power measurement system for forward and reverse monitoring, and a field monitoring system of up to 6 GHz. |
|
Download Datasheet
Product Details | |
|
|
|
| 50 µH Line Impedance Stabilization Network (LISN) from 9 kHz to 30 MHz | |
Line Impedance Stabilization Network
from TEKBOX Digital Solutions
|
| The TBL5008-2C from TEKBOX Digital Solutions is a Line Impedance Stabilization Network (LISN) that operates from 9 kHz to 30 MHz. It provides a stable 50? (50µH + 5?) impedance and includes air-core inductors to avoid saturation under load. This LISN has a 50 µH inductor and is designed for testing single phase, AC-powered equipment with supply voltages up to 250 V and a maximum current of 8 A. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Reverberation Chamber from 10 kHz to 40 GHz | |
Reverberation Chamber
from Frankonia Germany EMC Solutions GmbH
|
| The RVC S from Frankonia Germany EMC Solutions GmbH is a Reverberation Chamber that operates from 10 kHz to 18 or 40 GHz. It has a Lowest Usable Frequency (LUF) of 200 MHz at a working distance (?/4) of more than 400 mm, complying with IEC/EN 61000-4-21 and ISO 11452-11 standards. |
|
Download Datasheet
Product Details | |
|
|
|
| Spectrum Analyzer from 9 kHz to 3.8 GHz | |
Spectrum Analyzer
from Good Will Instrument Co., Ltd.
|
| The GSP-8380 from Good Will Instrument is a Spectrum Analyzer that operates from 9 kHz to 3.8 GHz. It is a general-purpose spectrum analyzer designed to provide wideband spectrum analysis for various test and measurement environments. This analyzer consists of a pre-amplifier along with optional EMI filter and tracking generator that improve spectral purity over the frequency range. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| EMC Pre-Amplifier from 30 to 3000 MHz | |
EMC Pre-Amplifier
from MTS Systemtechnik GmbH
|
| The MKV-822-0200 from MTS Systemtechnik GmbH is an EMC Pre-Amplifier that operates from 30 to 3000 MHz. It delivers a gain of up to 22.7 dB and has a noise figure of less than 2.7 dB with an output P1dB of 8 dBm. This amplifier has a reverse isolation of 25.5 dB and a VSWR of 1.3:1 (input/output). It requires a DC supply of +12 V and consumes less than 50 mA of current. |
|
Download Datasheet
Product Details | |
|
.jpg)
.jpg)
Please wait...