EMC Power Amplifiers
from Exodus Advanced Communications
The AMP20193 from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 10 kHz to 100 MHz (band A) & 100 to 400 MHz. It delivers a saturated output power of more than 600 W and a power gain of more than 57 dB. This power amplifier has a 2-tone intermodulation (IMD) of -30 dBc and a return loss of less than -10 dB (input/output).
The MPA-0G6-6G-20 from Maury Microwave is a GaN Power Amplifier (PA) that operates from 0.6 to 6 GHz. It delivers a saturated output power of 20 W with a small signal gain of over 46 dB. It has a third-order intermodulation distortion (IM3) of -39 dBc and a VSWR of less than 2:1 (input).
The RESA from The EMC Shop is a Real-time EMI Signal Analyzer that operates from 9 kHz to 3.2 GHz or 7.5 GHz. It has an EMI filter, a Quasipeak detector, and EMI test bandwidth settings for taking reliable measurements compliant with FCC, CISPR, MIL-STD 461, and other test standards. This signal analyzer has a dynamic range of 60 dB and a resolution bandwidth of 1 Hz to 3 MHz.
The EMS61000-12C from Everfine is a Ring Wave Generator designed for ring wave immunity testing in accordance with IEC 61000-4-12. It is used to evaluate the immunity of electrical and electronic equipment against oscillatory transient disturbances caused by switching operations and power network faults.
The PAT20M from AFJ Instruments is a Pulse Limiter that operates from 9 kHz to 30 MHz. It is designed to protect the input stage of EMI receivers with an attenuation of 20 dB for pulse voltages up to 1 W. This pulse limiter can handle an input pulse energy with a pulse width of 500 µs and has a VSWR of 1.05:1 (input) & 1.15:1 (output). It has a low-pass filter of up to 100 MHz and an attenuator that provides an attenuation of 20 dB.
Connect with the entire embedded community and experience the latest developments in
the embedded systems industry live at the embedded world Exhibition & Conference – from
10–12 March 2026 at the Exhibition Centre Nuremberg. Click here to learn more.
The GTEM-2 from Lisun Group is a GTEM Cell Test Chamber that has a transverse electromagnetic wave transmission chamber for EMC performance testing. It produces an electric field of strength ranging from 0 to 200 V/m. This GTEM cell can handle an input power of 1000 W and has a VSWR of less than 1.5:1.
The SAS-580 from A.H. Systems is a Horn Antenna that operates from 1.1 to 1.7 GHz. It has a gain of 14.7 dBi and an antenna factor of 18.2 dB/m. This antenna can handle a continuous power of up to 550 W and produces radiated fields of up to 700 V/m. It has a beamwidth of 29° (E-plane) & 28° (H-plane) and a VSWR of 1.2:1.
The RP285-20-47-C from AstrodyneTDI is a Single-Phase PLC Filter that is rated for a current value of up to 20A. It has a leakage current of 7.40 mA (at 250 VAC, 50 Hz) & 4.25 mA (at 120 VAC, 60 Hz) and a hipot rating of 2700 VDC (line-to-ground). This filter can be placed directly after PLC modems to create a clean, isolated transmission path, ensuring that signals stay contained between communicating modems.
The SUR T15 from EMCSOSiN is a 3-Phase Surge Immunity Generator that simulates surge disturbances for open-circuit and short-circuit voltages. It produces a 1.2/50 µs open-circuit voltage waveform with a voltage level of 0.2 to 15 kV and an 8/20 µs short-circuit current waveform with a current level of 0.1 to 7.5 kA. This surge generator produces synchronous, asynchronous, and automatic phases ranging from 0-359° and has positive, negative or alternating polarities.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.