Latest News & White Papers this Week

18 Nov, 2025 Newsletter - EMC Directory

Top stories this week. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


Weekly Edition
Date: 18 Nov, 2025

Featured Products this Week

125 W Class A/AB Solid-State Power Amplifier from 20 to 1000 MHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP20020 from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 20 to 1000 MHz. It delivers a saturated output power of more than 125 W (CW/Pulse) with a power gain of over 51 dB and a gain adjustment range of 20 dB. This amplifier has a 2-tone intermodulation of -30 dBc and a return loss of less than -10 dB (input).

Download Datasheet

EMI Test Receiver from 10 Hz to 26.5 GHz

EMI Receiver from Rohde & Schwarz

The R&S®FSWT from Rohde & Schwarz is an EMI Test Receiver that operates from 10 Hz to 26.5 GHz. It has two equivalent, switchable RF inputs, a measurement and analysis bandwidth of up to 500 MHz and two analog outputs for video voltage and demodulators. This EMI test receiver has a frequency resolution of 0.01 Hz and a phase noise of less than -155 dBc.

Download Datasheet

Horizontal/Vertical (H/V) E-Field Generator from 10 kHz to 30 MHz

E-Field Generator from ETS-Lindgren

The 5502 from ETS-Lindgren is a Horizontal/Vertical (H/V) E-Field Generator that operates from 10 kHz to 30 MHz (vertical or E-mode) and 100 kHz to 30 MHz (horizontal or H-mode). It has a two-conductor line system that generates a transverse electromagnetic wave (TEM) with a field strength of up to 200 v/m.

Download Datasheet

Tuned Dipole Antenna Set for EMC Compliance Testing from 25 MHz to 1 GHz

EMC Antenna Kit from A.H. Systems

The TDS-535 from A.H. Systems is a Tuned Dipole Antenna Set designed to provide reliable and repeatable measurements for EMC compliance testing across a frequency range from 25 MHz to 1 GHz. It can be used for precise EMC testing in both transmit and receive mode as per FCC, MIL-STD, and VDE standards.

Download Datasheet

Electro-magnetic Foam Absorber from 0.8 to 110GHz

EMC Absorbers from TDK RF SOLUTIONS INC.

The IS-SM100-TM from TDK RF Solutions is an Electromagnetic Absorber for frequencies from 300 MHz to 110 GHz. It has a pyramidal shape with a length of 100 cm and delivers excellent electromagnetic absorption performance starting at low frequency ranges. This absorber consists of a polyethylene foam base, utilizes the ohmic loss of carbon and is stable against chemicals with long service life.

Download Datasheet

Flexible Real-Time Spectrum Analyzers from 5 kHz to 26.5 GHz

Spectrum Analyzer from Rigol Technologies

The RSA6000 Series from RIGOL Technologies are Real-Time Spectrum Analyzers (RTSAs) that operate from 5 kHz to 26.5 GHz. They are flexible spectrum analyzers designed to deliver high performance and speed to meet the test demands in various applications, such as wireless communications and IoT. These spectrum analyzers consist of a pre-amplifier, a tracking generator, and an EMI filter.

Download Datasheet

Sponsored by Spectrum Control

Design. Configure. Connect. Custom EMI-Filtered 38999s in 12 Weeks

Configure your custom EMI-filtered 38999 connectors online in minutes - built to your specs, layout, and timeline. Spectrum Control delivers rugged, high-performance solutions with superior EMI protection in just 12 weeks, with no NRE. Click here to learn more.

High speed 8 GHz real-time EMC and EMI diagnostic tool

EMC Scanner from Y.I.C. Technologies

The EMScanner from YIC Technologies is an EMC Scanner with a broadband frequency coverage of 150 kHz to 8 GHz. It has an antenna array of of 1.218 (42 x 29) H-field probes and a probe spacing of 7.5 mm with a spatial resolution of 3.75 mm. This EMC scanner has a measurement plane isolation of greater than 20 dB and maximum radiated power load of 10 W.

Download Datasheet

Electromagnetic Clamp from 0.1 MHz to 1 GHz

Absorbing Clamp from 3Ctest

The EM CL100 from 3Ctest is an Electromagnetic Clamp that can handle an injection frequency of 0.1 MHz to 1000 MHz. It can handle an input electric level of up to 100 W at 0.15 to 100 MHz for 15 minutes, up to 100 W at 100 to 230 MHz for 5 minutes, and up to 50 W at 230 to 1000 MHz for 3 minutes.

Download Datasheet

3-Axis Loop Antenna System from 9 kHz to 30 MHz

EMC Antenna from Narda Safety Test Solutions

The RF-300 from Narda Safety Test Solutions is a Loop Antenna System that operates from 9 kHz to 30 MHz. It is a 3-axis system that can be combined with any EMI receiver for testing luminaries as per the EN 55015 (CISPR-15) standard. This antenna system consists of a switching unit. It measures 2 m in diameter and is ideal for EMC testing applications.

Download Datasheet

High-precision ESD Simulator designed for IEC and ISO Compliance Testing up to 30 kV

ESD Simulator from Noise Ken

The ESS-PS1 from Noise Ken is an Electrostatic Discharge (ESD) Simulator that generates electrostatic discharge of up to 30 kV. It can perform ESD testing of devices to ensure high reliability and safety as per IEC 61000-4-2/ISO 10605 standards. This ESD simulator consists of a discharge gun with an integrated touch panel, a discharge module, discharge detection function, internal battery, and an interface.

Download Datasheet

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Latest News & White Papers this Week