Latest News & White Papers this Week

11 Nov, 2025 Newsletter - EMC Directory

Top stories this week. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


Weekly Edition
Date: 11 Nov, 2025

New Whitepaper - Download Now!

Featured Products this Week

100 W Class A/AB Solid-State Power Amplifier from 10 to 1000 MHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP20015 from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 10 to 1000 MHz. It delivers a saturated output power of more than 100 W (CW/Pulse) with a power gain of more than 50 dB and a gain flatness of less than 4 dB p-p. This power amplifier is based on Class A/AB linear design that incorporates high-power advanced technology devices, thereby achieving high efficiency.

Download Datasheet

EMI Filtered Quad-Row Board-to-Board Connectors

EMI Filtered Connector from Molex

The Quad-Row Connectors from Molex are EMI Filtered Board-to-Board Connectors that have a staggered circuit layout for a highly compact package in a wide range of space-constrained applications. These connectors have 12 to 80 circuits in a four-row signal pin layout, which helps save PCB space and increases device compactness. They have a pitch of 0.175 mm with a height of 0.50, 0.60, or 0.80 mm.

Download Datasheet

Custom EMI-filtered MIL-DTL-38999 connectors

EMI Filtered Connector from Spectrum Control

The Filtered Connector Express from Spectrum Control is an online customization tool for designing EMI-filtered MIL-DTL-38999 circular connectors that block electromagnetic interference before it reaches your system. These connectors are available with Nickel or ODCAD-plated aluminum housings and solderable construction for reliable, high-frequency operation.

Download Datasheet

EMI Receiver Test System from 9 kHz to 1 GHz

EMI Receiver from Lisun Group

The EMI-9KC from Lisun Group is an EMI Receiver Test System that operates from 9 kHz to 1 GHz. It is designed to measure both conducted and radiated interference generated by electrical and electronic products during operation and provide support for EMC compliance as per standards such as CISPR 16-1-1 and GB/T 6113.101.

Download Datasheet

Double-Ridge Waveguide Horn Antenna from 4 to 8 GHz

EMC Antenna from Chengdu RF Miso Co., Ltd.

The RM-BDHA48-20 from RF MISO is a Double-Ridge Waveguide Horn Antenna that operates from 4 to 8 GHz. This linearly-polarized antenna provides a gain of 20 dBi and has a VSWR of 1.5:1. It has a high-power handling capability with high directivity and low loss. This horn antenna is available in an Aluminum housing that measures 585.40 x 284.10 x 234.09 mm and has an SMA (female) connector & mounting brackets.

Download Datasheet

New Whitepaper - Download Now!

Compact 30 kV ESD Simulator with Touchscreen Control

ESD Simulator from 3Ctest

The EDS MAX30 from 3Ctest is a high-performance ESD Simulator that generates electrostatic discharge of up to 30 kV. It complies with ISO 10605, GB/T 19951, IEC 61000-4-2, and related standards. This simulator provides a voltage range of 0.2 kV to 30 kV (±5%) with 100 V resolution and a maintained time of 5 to 10 seconds.

Download Datasheet

250 W Class A Solid-State Power Amplifier from 80 MHz to 1 GHz

EMC Power Amplifiers from AMETEK CTS GmbH

The CBA801MG-250E from AMETEK is a Solid-State Power Amplifier (SSPA) that operates from 80 MHz to 1 GHz. It delivers an output power of more than 250 W with a small signal gain of 54 dB and a gain variation of ±2 dB. This power amplifier is based on Class A technology with a modular high-power density design and is suitable for rigorous IEC/ISO and MIL radiated immunity testing.

Download Datasheet

6 GHz EMC Scanner System for Test Analysis

EMC Scanner from Pendulum Instruments

The SCN-534/6G from Pendulum Instruments is a 6 GHz EMC Scanner System (optional extension up to 10 GHz). It enables repetitive and consistent measurements for easy comparative measurements between alternative designs. This scanner is a pre-compliance tool for measurement and analysis of Electromagnetic Interference (EMI).

Download Datasheet

E-Field Probe from 20 MHz to 60 GHz

Near Field Probe from Raditeq

The RSS2060S from Raditeq is an E-Field Probe that operates from 20 MHz to 60 GHz. It can measure electric field strengths of 2 to 1000 V/m at a speed of up to 100 measurements per second. It can measure both continuous wave (CW) and or Pulse modulated (PM) fields as defined in the Mil-Std 461. This probe can simultaneously measure X-Y-Z axis field strengths & the isotropic value and has an anisotropy of less than ± 4 dB with a linearity of ± 0.5 dB ± 0.5 V/m.

Download Datasheet

RF over Fibre Interference-Free Signal Monitoring

Fiber Optic Link from PPM Test

The point2point AC Coupled Link from PPM Test is a Fiber Optic Link designed for transmission of low-level RF and analog signals from 40 Hz to 3 GHz. Available in multiple series, it covers frequency ranges of 40 Hz to 250 MHz (G series), 2 kHz to 1.35 GHz (K series), 1 MHz to 2 GHz (P series), and 10 MHz to 3 GHz (S series). This fiber optic link has a gain flatness between ±0.5 dB and ±0.75 dB, noise figures of 22–26 dB, and rise times as low as 200 ps.

Download Datasheet

New White Papers & Articles

Mitigating Electromagnetic Interference with Filtered Connectors - Spectrum Control

Multiple Cameras For EMC Test Sites - PONTIS EMC

EMC Testing Workflow: From Prototype to Certified Product - EKTOS Testing & Reliability Services

Amplifier Classification A vs. AB - Exodus Advanced Communications

More Whitepapers

Request EMC testing Quotes