The PA 3010 Set from Langer EMV-Technik is an EMC Pre-Amplifier set that operates from 10 MHz to 10 GHz. This pre-amplifier provides a gain of 30 dB with a noise figure of 2.5 dB and output P1dB of 18 dBm. This pre-amplifier is designed for the amplification of measuring signals, e.g., weak signals of near-field probes with high resolution. It requires a supply of 12 V and a current input of 170 mA.
EMC Power Amplifiers
from Exodus Advanced Communications
The AMP20090 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of more than 8.0 KW with a power gain of over 69 dB. This SSPA is based on the Class A/AB linear GaN devices that achieve high efficiency with unprecedented reliability and ruggedness. It has spurious levels of less than -60 dBc and harmonics of less than -20 dBc.
The SEA-F from Siepel is a Flat EMC Absorber that operates from 200 MHz to 40 GHz. It can handle a power of up to 1.6 kW/m² and withstand temperatures up to 160°C (320°F). This absorber has exceptional physical properties and is available with an LIV coating that provides brightness, flexibility, and a wide choice of colors.
Robotic Near Field Scanner
from Tekiknow Technologies India Pvt. Ltd.
The TEK-Near Field Scanner from Tekiknow Technologies India Pvt. Ltd. is a Robotic Field Scanner that is designed for circuit design and electronic troubleshooting. It can perform real-time measurement and efficient fault diagnosis for the design and pre-qualification phases. This scanner can be controlled via Ethernet, GPIB, USB, and RS232 interfaces.
Anechoic Chamber
from Frankonia Germany EMC Solutions GmbH
The CHC Plus from FRANKONIA is a Compact Anechoic Hybrid Chamber that operates from 9 kHz/ 30 MHz to 18 GHz or 40 GHz. It is designed for full-compliant emission and immunity testing and has a test distance of 3.0 m. This chamber has a Quiet Zone (QZ) diameter of 1.2 m and complies with CISPR 16-1-4 standard for emissions and IEC/EN 61000-4-3 standard for immunity.
The dAV-Cr-HD from mk-Messtechnik is an EMC-shielded camera that has EMI shielding of up to 200 V/m for up to 18 GHz. It uses a 1/2.8” progressive CMOS sensor with a resolution of 2.1 megapixels that provides 30x optical zoom and 12x digital zoom for flexible monitoring of DUTs. This camera is available in an anodized aluminum housing that measures 135 x 80 x 80 mm.
Line Impedance Stabilization Network
from Narda Safety Test Solutions
The L1-150M1 from Narda Safety Test Solutions is a Line Impedance Stabilization Network (LISN) that operates from 10 kHz to 400 MHz. It delivers a continuous output current of up to 100 A and a peak output current of up to 150 A. This LISN provides safe and easy connections through M10 screw terminals for both line input and EUT connections.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.