IMS 2026 Insider: Interesting EMC Testing Products Showcased at the Exhibition Floor

https://cdn.emc-directory.com/news/vvpv6ldwelpe7ysbxdrz_639166875139137303.webp712370

IMS 2026 (IEEE MTT-S International Microwave Symposium) took place in Boston this year from 9–11 June 2026. IMS is the world’s leading event for RF and microwave professionals, which brings together industry and academic experts to showcase the latest innovations in wireless and communication technologies. In this article, we have listed a few interesting EMC Testing Products that were showcased on the IMS Exhibition floor this year. Here is the list!

500 W CW / 1 kW Pulse Power Amplifier from 0.8–3.2 GHz 

The AMP20114 is a dual-mode CW and pulse power amplifier that operates from 0.8 to 3.2 GHz. It delivers 500 W CW and 1 kW pulse power with pulse widths up to 560 µsec, 10% duty cycle, and 60 dB gain. Designed for automotive pulse radar, EMC/EMI, and commercial RF applications, it includes comprehensive monitoring for reliable operation in a compact 9U rack-mount chassis (60 kg). 

Exodus Advanced Communications (Booth #14016) 

50 W CW / Pulse Wideband RF Power Amplifier from 700 MHz to 6 GHz 

The RA701M602-4747A is an all-solid-state wideband RF power amplifier that operates from 700 MHz to 6 GHz. It delivers 50 W output power with a high-linearity Class A design supporting both CW and pulsed operation. Designed for reliable performance with strong mismatch robustness, it is well suited for demanding EMC and RF test applications.

R&K Company Limited (Booth #15020) 

Integrated RF Power Amplifier and Test Solutions for Modern EMC Applications

Maury’s EMC-focused RF and microwave solid-state power amplifiers are specifically designed for modern EMC applications. They provide broadband coverage, high linearity, and efficient modulation handling. These GaN-based power amplifier solutions are complemented by high video bandwidth peak power sensors, low-loss broadband couplers, and amplitude- and phase-stable cables, ensuring reliable signal transmission and accurate power analysis across the RF path.

Maury Microwave (Booth #16027/16028)

Flexible EMI Test Receivers from DC to 7.125 GHz for EMC Measurements 

The R&S EPL1001 and R&S EPL1007 are high-flexibility EMI test receivers that operate up to 1 GHz and 7.125 GHz, respectively. They provide a cost-effective solution for EMI measurements across development, certification preparation, and final compliance testing. Configurable options can be added over time, ensuring adaptability to evolving EMC standards and long-term investment protection.

Rohde & Schwarz (Booth #14035) 

Dual-Polarized Broadband Horn Antenna from 600 MHz to 9 GHz for EMC Testing 

The QRH600 is a dual-polarized broadband horn antenna that operates from 600 MHz to 9 GHz. Designed for high-efficiency EMC testing across commercial, automotive, and wireless applications, its wide frequency coverage reduces antenna swaps, streamlines chamber workflows, and improves laboratory productivity by minimizing manual intervention.

RFSpin (Booth #12047) 

Full-Spectrum EMC Test Systems for Aerospace & Defense Compliance 

ETS-Lindgren delivers high-performance EMC and RF testing solutions for aerospace and defense applications, supporting critical standards such as MIL-STD-461, RTCA DO-160, and CISPR. Its portfolio includes reverberation chambers, shielded enclosures, antenna positioning systems, and advanced measurement software, enabling accurate and repeatable validation of avionics, radar, satellite communications, and military platforms. These solutions are designed to ensure reliability, performance, and interoperability across complex mission-critical systems. 

ETS-Lindgren (Booth #12032) 

400 W (200 W P1dB), 6–18 GHz Class A/AB Amplifier  

The AMP20178 is a Class A/AB linear amplifier operating from 6 to 18 GHz, delivering 400 W output power with a minimum of 200 W P1dB and 55 dB gain. Designed for EMC, CW/pulse, and laboratory test environments, it features integrated protection and monitoring circuits, a local LCD display, and remote control interfaces. Its compact, rugged 7U rack-mount chassis ensures reliable operation in demanding RF test setups. 

Exodus Advanced Communications (Booth #14016) 

300 W, 2–20 GHz Rack-Mount Amplifier with Integrated Control and Protection 

The REMC0220GG is a rack-mount EMC amplifier module operating from 2 to 20 GHz and delivering 300 W CW output power. It includes built-in protection against high VSWR, current imbalance, and over-temperature conditions to ensure dependable operation. The system features Ethernet remote control, a digital attenuator, and an optional internal signal generator module, enabling a fully integrated high-power signal source for EMC test environments. 

RF-Lambda (Booth #16046) 

everything RF has published a magazine for IMS 2026 that lists over 150 products featured by companies at IMS 2026. You can download a digital version of the magazine below.

Download Magazine 

IMS Insider 2026: Discover Products and Technologies Featured at IMS 2026