EMC testing is all about standards. Whether you are developing 5G products, automotive equipment, military equipment or something as simple as a common table lamp, your device must meet requirements set by standardization bodies such as IEC, CISPR, ISO, IEEE, CENELEC, ETSI, FCC, ANSI, RTCA or the MIL-STD committee. Click here to learn more.
The TEMH20 from RFSpin is a TEM Horn Antenna that operates from 1 to 22 GHz. This linearly polarized antenna has an antenna factor from 23.5 to 41 dB/m and a VSWR of 2.6:1. It generates homogenous fields with high gain using the dielectric lens which allows close proximity radiation immunity evaluation testing. This antenna is available in a corrosion-resistant housing that measures 112 x 198 x 345 mm with a 3.5 mm coaxial connector and comes with an adapter with ¼ inch inner thread.
The Custom Circular EMI Filtered Connectors from Spectrum Control are specialized circular connectors with integrated EMI filters. They have planar-style filtered arrays and are fully intermateable with MIL-DTL-38999 Series III. The planar-style filtered arrays in C and Pi circuits can accommodate capacitance up to 200 nF in most configurations. These connectors have a large planar capacitance pin-to-pin ratio, providing power and signal filtering in a single package.
The TBPS01 from Tekbox Digital Solutions is a Near-Field Probe Set designed for identifying and troubleshooting radiated emissions issues at the circuit board level. Near-field probes are used to locate the source of RF emissions as well as circuitry susceptible to RF. It includes 3 magnetic field probes (H20, H10 and H5) as well as an electric field probe (E5). The probe set is ideal for assessing the electromagnetic behavior of individual components which can optimize circuit design. The TBPS01 probes are lightweight and portable, making near-field probing convenient and efficient.
EMC testing is all about standards. Whether you are developing 5G products, automotive equipment, military equipment or something as simple as a common table lamp, your device must meet requirements set by standardization bodies such as IEC, CISPR, ISO, IEEE, CENELEC, ETSI, FCC, ANSI, RTCA or the MIL-STD committee. Click here to learn more.
The AMP2074 from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1 to 2 GHz. It delivers an output power of 350 W with a gain of more than 55 dB. This Class AB power amplifier is based on GaN technology, and has spurious emissions of less than 60 dBc and harmonics of better than 20 dBc. It is equipped with built-in protection circuits and is suitable for all modulation standards.
The SSISOC50V10K18G from AR RF/Microwave Instrumentation is an Immunity Test System with a frequency range of 10 kHz to 18 GHz. It is designed to develop a 50 V/m field level at a 1m test distance for ISO 11452-2 and ISO 11452-5 full-vehicle testing. This system has 4 RF amplifiers and 3 antennas (a stripline antenna, a log-periodic antenna and a horn antenna). It utilizes by emcware ® 5.0 software to system and testing control which is preloaded and delivered on a new laptop as part of the overall system. The export classification for this equipment is 3A001
The LDT-1.5 from ETS-Lindgren is an EMC Test Table with a maximum load capacity of 100 Kg. It is portable and is constructed with materials with dielectric strength in the range of 0.3 to 1.03. This test table is suitable for radiated emissions measurements and shows resistance to measurement influence at frequencies more than 1 GHz. It measures 150 x 100 x 80 cm and can be used with a turntable of 1.2 m diameter or larger. This table has an EUT placement grid integrated on the top of the table for ease of use and accurate EUT positioning.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.