| New and Interesting Products |
|
|
| 40 W Solid-State EMC Power Amplifier from 2 to 8 GHz | |
EMC Power Amplifiers
from Exodus Advanced Communications
|
| The AMP20199 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 2 to 8 GHz. It delivers a saturated output power of more than 40 W and a power gain of more than 46 dB with a gain flatness of less than 5 dB p-p. This power amplifier is based on Class A/AB linear design and equipped with advanced high-power technology. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 15 A AC/DC Current Probe up to 50 MHz | |
Current Probe
from Keysight Technologies
|
| The 1147B from Keysight Technologies is an AC/DC Current Probe that has a bandwidth of DC to 50 MHz. It can measure a peak current of 15 A, DC current of 15 A, continuous current of 10 Arms and peak non-continuous current of 30 A. This current probe has an easy protect function and a demagnetizing switch to remove any residual magnetism that builds up in the magnetic core. |
|
Download Datasheet
Product Details | |
|
|
|
| A&D Radiated Immunity Test System from 2 MHz to 18 GHz | |
Immunity Test System
from Rohde & Schwarz
|
| The R&S®TS9981M from Rohde & Schwarz is a Radiated Immunity Test System that is designed for immunity testing of aerospace and defense (A&D) components. It covers a frequency range of 2 MHz to 18 GHz and supports CW, AM & PM modulations. This test system generates a field strength of up to 200 V/m over a test distance of 1 m. It includes a signal generator of up to 20 GHz, a broadband amplifier system from 9 kHz to 18 GHz, and an immunity test antenna set from 2 MHz to 18 GHz. |
|
Download Datasheet
Product Details | |
|
|
|
| RF Shielded Test Enclosure from 20 MHz to 12 GHz | |
Shielded Test Enclosure
from LabiFix Innovations
|
| The LBX1760 from LabiFix Innovations is an RF Shielded Test Enclosure that covers frequencies from 20 MHz to 12 GHz. It has a shielding effectiveness of up to 90 dB and is designed and developed for wireless device testing. This shielded enclosure provides high EMC/RFI shielding against RF interference, even in sensitive RF environments. |
|
Download Datasheet
Product Details | |
|
|
|
| Absorbing Clamp from 30 MHz to 1 GHz | |
Absorbing Clamp
from Com-Power Corporation
|
| The CLA-050 from Com-Power Corporation is an Absorbing Clamp that operates from 30 MHz to 1 GHz. It is designed to measure disturbance power on power input lines and other auxiliary I/O lines. This absorbing clamp consists of a broadband current transformer and two sets of ferrite rings. The ferrite rings act as a broadband RF power absorber, isolating the current transformer from disturbances on the mains and establishing asymmetric (common-mode) impedance. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
| Magnetic Field Generator from 9 kHz to 1 GHz | |
Magnetic Field Generator
from Narda Safety Test Solutions
|
| The 3010 from Narda Safety Test Solutions is a Magnetic Field Generator that operates from 9 kHz to 1 GHz. It has a power level range of -107 to + 10 dBm and a resolution of 0.1 dB with an accuracy of ± 1 dB. This magnetic field generator is fully automatic and programmable via a RS232 serial port or a USB interface. It operates on a built-in rechargeable 10-15 V battery, consuming 2.5 A of current. |
|
Download Datasheet
Product Details | |
|
|
|
| Handheld Spectrum Analyzers from 9 kHz to 54 GHz | |
Spectrum Analyzer
from Ceyear
|
| The 4025 Series from Ceyear are Spectrum Analyzers that covers a frequency range of 9 kHz to 54 GHz. They can operate in real-time spectrum analyzer, interference analyzer, channel scanner, AM/FM/PM analyzer, and location analyzer modes. These spectrum analyzers have a resolution bandwidth of 1 Hz to 20 MHz, DANL of less than -165 dBm/Hz, and an SSB phase noise of less than -113 dBc/Hz. |
|
Download Datasheet
Product Details | |
|
|
|
| Coupling Decoupling Network from 30 to 300 MHz | |
Coupling Decoupling Network
from Laplace Instruments
|
| The CDNE M2 from Laplace Instruments is a Coupling Decoupling Network (CDNE) that covers a frequency range of 30 to 300 MHz. It has a test voltage of 2000 V (AC) and an insertion loss of more than 0.1. This CDNE has a power rating of 520 V and is fully compliant with CISPR15 ed 9, CISPR16-1-2, CISPR16-2-1 & IEC61000-4-6 C standards. |
|
Download Datasheet
Product Details | |
|
|
|
| Tx/Rx Fiber Optic Link Modules from 80 Hz to 3.5 GHz | |
Fiber Optic Link
from HV Technologies
|
| The MOL2000T from HV Technologies is a Fiber Optic Link that is designed for the transmission of analog electric signals (CW and pulses) from 80 Hz to 3.5 GHz. It has a remotely selectable system gain of -62.5 to +24 dB in 0.5 dB steps. This fiber optic module is available as a transmitter and receiver module and supports a link distance of up to 1 km. |
|
Download Datasheet
Product Details | |
|
|
|
| EFT/Burst Generator with Output Voltage of 200 to 5000 V | |
EFT / Burst Generator
from Noise Ken
|
| The FNS-AX4-A20 from Noise Ken is an EFT/Burst Generator that is designed to simulate high-frequency noise to evaluate the resistance of electronic devices. It produces an output voltage of 200 to 5000 V in 10 V steps with both positive & negative polarities and has a pulse repetition frequency of 0.1 kHz to 2000 kHz. |
|
Download Datasheet
Product Details | |
|
|
|
| Balanced Line Impedance Stabilization Network from 30 to 300 MHz | |
Line Impedance Stabilization Network
from Schwarzbeck Mess - Elektronik OHG
|
| The VHFB 8801 from Schwarzbeck Mess-Elektronik is a Balanced Line Impedance Stabilization Network (LISN) that operates from 30 to 300 MHz. It is designed for use during radiated disturbance measurements and is compliant with the CISPR 16-1-4/Ed.5 standard. The LISN serves as a defined RF-termination device at the equipment under test (EUT) mains cable and presents the same impedance to each terminal of the cable. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Shielded Tent for EMC Pre-Compliance Measurements | |
Shielded Tent
from TEKBOX Digital Solutions
|
| The TBST-86/49/45/2-B from TEKBOX Digital Solutions is a Shielded Tent that is designed to suppress interference from ambient noise in EMC pre-compliance measurements. It is made of two layers of conductive fabrics that provide a shielding of more than 50 dB. This shielded tent has a size of 124 x 64 x 60 cm or 86 x 48 x 48 cm supported by rigid Aluminum profiles with a frame measuring 20 x 20 mm. |
|
Download Datasheet
Product Details | |
|
|
|
| Feedthrough Filter Module with Integrated Pi EMI Filter | |
EMC / EMI Filter
from MTS Systemtechnik GmbH
|
| The FIL-M12-PI-1NF from MTS Systemtechnik is a Feedthrough Filter Module that has an integrated Pi EMI filter. It is designed to be built into MTS’s MSB series shielding boxes and has twelve independent filtered lines enabling the connection of devices with low data rates, ideal for current loop, serial data, audio, and automotive bus systems (CAN, etc.). |
|
Download Datasheet
Product Details | |
|
|
|
| EMC Noise Scanner from 150 kHz to 3 GHz | |
EMC Scanner
from Morita Tech Co., Ltd.
|
| The WM7300 from Morita Tech is an EMC Noise Scanner that operates from 150 kHz to 3 GHz (also available up to 8 GHz). It is designed to measure omnidirectional noise signals over a scanning area of A3 size. This scanner consists of a near-field probe that supports movement along a straight axis and 4x rotational axes over a scanning area of 420 x 297 x 200 mm. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Amplifier from 100 MHz to 18 GHz | |
EMC Pre-Amplifier
from US Microwave Laboratories
|
| The USLN10180 from US Microlabs is a Low Noise Amplifier (LNA) that operates from 100 MHz to 18 GHz. It provides 25 dB of gain with a noise figure of 3 dB and an output P1dB of +14 dBm. This low-noise amplifier is suitable for EMC testing and certification, antenna field measurements, communication systems, and instrumentation. The USLN10180 amplifier is equipped with reverse polarity protection circuitry to ensure high reliability and safety during reverse connection. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Shielded Fiber Optic Converter for Testing and Charging Electric Vehicles | |
Shielded Fiber Optic Converter
from PONTIS EMC
|
| The foCarCharger from PONTIS EMC is a Fiber Optic Converter designed for shielded transmission between EV and EVSE via fiber optic cables. It is ideal for testing electric vehicles during the charging process (AC and DC charging support). This converter primarily supports data communication using pilot signal (PWM), PLC, and CAN protocols, enabling compatibility with multiple standards, including CCS, CHAdeMO, and GB/T. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
Please wait...