| Top EMC Equipment |
|
|
| 100 W Solid State Power Amplifier from 1–10 GHz | |
EMC Power Amplifiers
from Exodus Advanced Communications
|
| The AMP20085 from Exodus Advanced Communications is a solid-state EMC power amplifier that operates from 1 to10 GHz. It delivers an output power of more than 100 W, with a gain of more than 50 dB and has a gain-adjustment range of more than 20 dB. This SSPA is based on a Class A/AB linear design, exceptional reliability, and rugged construction. |
|
Download Datasheet
Product Details | |
|
|
|
| Automotive Radiated Immunity Test System from 200 MHz to 6 GHz | |
Immunity Test System
from Rohde & Schwarz
|
| The R&S TS9981A from Rohde & Schwarz is a Radiated Immunity Test System that operates from 200 MHz to 6 GHz (lower frequency up to 80 MHz available). It is designed for testing RF components inside vehicles as per the ISO 1142-2 standard. This test system is based on a modular design and consists of a signal generator, broadband amplifier systems, an immunity antenna set, a field monitoring system, RMS/peak power meter, and an antenna mast. |
|
Download Datasheet
Product Details | |
|
|
|
| Cubic TEM Cell from 10 kHz to 1 GHz | |
TEM / GTEM Cell
from TOYO Corporation
|
| The G-CELL from TOYO Corporation is a Cubic TEM Cell that operates from 10 kHz to 1 GHz. It can handle an input power of 150 W and an electric field strength of 30 V/m. It can accommodate EUT sizes of up to 40 x 40 x 40 cm and has a shielding of more than 50 dB. This TEM cell has a large opening design allowing easy EUT installation and customizable power/signal line filters. |
|
Download Datasheet
Product Details | |
|
|
|
| Spectrum Analyzers from 9 kHz to 9/20 GHz | |
Spectrum Analyzer
from Ceyear
|
| The 4042 Series from Ceyear are Spectrum Analyzers that cover the frequency measurement range of 9 kHz to 9/20 GHz. They support measurement function modes, such as real-time spectrum, interference analyzer, AM/FM/PM analyzer, channel scanner, field strength, power meter, peak-power meter, IQ analyzer, phase noise meter, vector signal analyzer, as well as such intelligent measurement functions as channel power, OBW, ACPR, emission mask, C/N, harmonics, and spur emissions. |
|
Download Datasheet
Product Details | |
|
|
|
| EMI Receiver from 9 kHz to 3 GHz | |
EMI Receiver
from AFJ INSTRUMENTS Srl
|
| The FFT 3310 from AFJ INSTRUMENTS Srl is an EMI Receiver that covers a frequency range from 9 kHz to 3 GHz. It is designed for the measurement of conducted and radiated electromagnetic interference compliant with CISPR standards. This EMI receiver uses FFT Scan Mode for fast measurements of conducted and radiated electromagnetic interference in accordance with requirements of EMI international, European & product standards, pre-selectors, and advanced software for EMC testing. |
|
Download Datasheet
Product Details | |
|
|
|
| Diode Pulse Limiter from DC to 200 MHz | |
Transient Limiter
from Schwarzbeck Mess - Elektronik OHG
|
| The VTSD 9561 D from Schwarzbeck Mess – Elektronik OHG is a Diode Pulse Limiter that operates from DC to 200 MHz. It consists of a high-power attenuator along with an Osram 2306 fuse lamp that protects sensitive equipments when measuring spectra with high energy. The fuse lamp allows users to recognize over-load conditions quickly and reliably, thereby preventing possible damage. |
|
Download Datasheet
Product Details | |
|
|
| Sponsored by Embedded World 2026 | | | |
|
|
| 100 kHz Programmable Ring Wave Generator | |
Ring Wave Generator
from EMCSOSiN
|
| The RWI T6 from EMCSOSiN is a Programmable Ring Wave Generator that operates at 100 kHz. It is designed to evaluate the performance of electrical and electronic equipments, devices, and other systems subjected to ring waves. This generator can validate the performance as per IEC 61000-4-12 and GB/T 17626-12 standards. It can generate signals in various formats &ndash positive, negative, and alternating (AC type). |
|
Download Datasheet
Product Details | |
|
|
|
| E-Field Probe from 20 MHz to 18 GHz | |
Near Field Probe
from ETS-Lindgren
|
| The EMSense Platinum from ETS-Lindgren is an E-Field Probe that covers a frequency range of 20 MHz to 18 GHz. It is capable of 2 million full measurements per second and 6 million samples across all three axes, delivering real-time insight into high-speed field variations. This probe has a dynamic field strength measurement range of 2 to 1000 V/m with a resolution down to 0.01 V/m. |
|
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Turntable for Commercial EMC Testing Applications | |
Antenna Positioners
from Com-Power Corporation
|
| The TTW-600 from Com-Power is a Turntable designed to rotate equipments under test (EUTs) during commercial EMC testing. It can primarily support and rotate desktop or floor-standing equipments, providing flexibility while maintaining a low-profile design. This turntable is constructed using a non-conductive material and consists of a rotation drive that incorporates a motor and a gear reduction driver. |
|
Download Datasheet
Product Details | |
|
|
|
| EMC Horn Antenna from 2.5 to 7.5 GHz | |
EMC Antenna
from AMETEK CTS GmbH
|
| The ATH2G8A-1 from Ametek is an EMC Horn Antenna that operates from 2.5 to 7.5 GHz. It generates field intensities of up to 500 V/m and has a gain of 18 dB over isotropic. This antenna can handle an input CW power of 12 kW and has a VSWR of less than 1.8:1. It measures 18 x 14.5 x 33.5 cm and has a WRD-250 D30 waveguide interface & waveguide flanges for mounting purposes. |
|
Download Datasheet
Product Details | |
|
|
|
| 30 A Absorbing Clamp from 30 MHz to 1 GHz | |
Absorbing Clamp
from EMC Electronic
|
| The AC301 from EMC Electronic is an Absorbing Clamp that operates from 30 MHz to 1 GHz. It is designed to measure the disturbance power radiated through the power cables of tested devices as per the EN 55016-1-3 standard. This clamp has a current rating of 30 A (with equipment under test (EUT)). It is ideal for testing devices such as domestic appliances and other electrical tools. |
|
Download Datasheet
Product Details | |
|
|
|
| Coupling Decoupling Networks from 150 kHz to 230 MHz | |
Coupling Decoupling Network
from Fischer Custom Communications
|
| The Series AF from Fischer Custom Communications are Coupling Decoupling Networks (CDNs) that operate from 150 kHz to 230 MHz. They are compliant with the IEC 61000-4-6 standard to support conducted immunity testing. These CDNs consist of a voltage attenuation generator and a decoupling attenuation generator. |
|
Download Datasheet
Product Details | |
|
|
| Sponsored by Embedded World 2026 | | |
|
|
| EMC Antenna Kit from 30 MHz to 6 GHz | |
EMC Antenna Kit
from Narda Safety Test Solutions
|
| The AS-04 from Narda Safety Test Solutions is an EMC Antenna Kit that covers a frequency range of 30 MHz to 6 GHz. It includes a BC-01 Biconical Dipole and LP-04 Log Periodic Dipole Array designed for radiated emissions and immunity testing that can be used in conjunction with any receiver or spectrum analyzer. These antennas have a gain of -15 to +2 dBi (BC-01) and 6 dBi (LP-04). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Snap-On RF Current Monitoring Probe from 10 kHz to 1 GHz | |
Current Probe
from TEKBOX Digital Solutions
|
| The TBCP2-1M800 from TekBox is a Snap-On RF Current Monitoring Probe that operates from 10 kHz to 1 GHz. It can handle currents up to 400 A with a frequency range of DC to 400 Hz, RF current of up to 10 A, and pulse current of up to 400 A. This probe has an aperture of 32 mm, a transfer impedance of 0 dB Ohms, and a 3dB bandwidth from 1 MHz to 800 MHz. |
|
Download Datasheet
Product Details | |
|
|
|
| Flexible Absorber Sheet from 1 MHz up to 10 GHz | |
EMC Absorbers
from Würth Elektronik
|
| The WE-FAS from Würth Elektronik is a Flexible Absorber Sheet that operates from 1 MHz up to 10 GHz. It has exceptional surface resistance & permeability and a thermal conductive interface with conductivity values up to 1.4 W/mK. This absorber is available in thicknesses ranging from 0.05 to 30 mm and has an adhesive surface for easy installation. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
Please wait...