EMC Power Amplifiers
from Exodus Advanced Communications
The AMP40049 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 40 to 50 GHz. It delivers a saturated output power of up to 30 W with a gain of over 45 dB. This SSPA is based on the Class A/AB linear amplifier design that achieves high efficiency with unprecedented reliability and ruggedness.
The EM-6990B from EM Antennas is a Preamplifier that operates from 10 kHz to 2 GHz. It is designed to be primarily used with EM Antennas’ EM-6992 near field probe set for performing EMI diagnostic testing. This preamplifier delivers a gain of 31 dB and has a noise figure of 4.75 dB.
The GTEM-1000 from GTemCell Group is a TEM Waveguide Cell that operates from 9 kHz to 3 GHz (emissions) and 80 MHz to 6 GHz (immunity). It can function as an alternative measurement facility for both radiated emission and immunity measurements and is compliant with IEC 61000-4-20 standard.
E-Field Generator
from AR RF/Microwave Instrumentation
The ATP10K100M from AR RF is an E/H Field Generator that produces both E (electric) and H (magnetic) fields. It has a field strength of up to 800 V/m over a frequency range of 10 kHz to 100 MHz. This field generator can handle an input CW power of up to 3000 W and has a VSWR of less than 2.0:1. This field generator is very flexible as it can be rotated and the height adjusted to accommodate the unit under test.
Exodus AMP20085 is a rugged Class A/AB solid-state amplifier delivering 100 W across 1.0–10.0 GHz. It offers 50 dB gain, advanced telemetry, and superior reliability for EMI/RFI, CW, and modulated signal testing in a compact 5U design. Click here to learn more.
The ET-6G18G-1 LR from Lorentz is a Microwave Horn Antenna that operates from 6 to 18 GHz. It has a gain of more than 19 dBi and a 3 dB beamwidth of 7-19° (E-plane) and 10-20° (H-plane). This antenna can handle an input power of up to 200 W and has a VSWR of less than 2.5:1. It measures 465.8 x 174.1 x 134.0 mm and has an N female connector for RF interface.
The AA-28G-500 from Advanced Amplifiers is a TWT Pulse Amplifier that operates from 2 to 8 GHz. It delivers a peak output power of more than +56 dBm (500 W) and a gain of over 56 dB. This amplifier has a pulse width of 0.1µs to CW and a rise/fall time of less than 15 ns. It can be controlled via Ethernet (LAN) and RS-232 interfaces. This amplifier requires an AC supply of 220 V and consumes less than 2.1 kVa of power.
Line Impedance Stabilization Network
from Com-Power Corporation
The LIN-120C from COM-POWER is a Line Impedance Stabilization Network (LISN) with a frequency range from 150 kHz to 30 MHz. It has an AMN impedance of 50 ohms, 50 microhenries (CISPR), 50 microhenries (ANSI), and an insertion loss of less than 1 dB with an isolation of more than 40 dB.
The S50 Series from GFUVE Electronics are AC Current Probes that can measure currents from 1 mA to 1200 A over a frequency range of 10 Hz to 10 MHz. They feature a round-jaw design and a high-nickel metal core, making them well-suited for power-quality applications that require high accuracy and low phase shift. These current probes have a coil ratio of up to 1000:1 and an output of 1mA per amp or 1mV per amp measured in the jaw.
Exodus AMP10041 is a rugged Class AB GaN amplifier delivering 100 W from 1–6 GHz with 50 dB gain. Compact and lightweight, it offers ultra-wide bandwidth, built-in protection, and high reliability for EMI/RFI testing, labs, and tactical systems. Click here to learn more.
The EPX/VE from Toyo Corporation is an EMC Software that is designed for the measurement and analysis of emissions for automobiles and on-vehicle equipment. It has an Accelerated Time Domain Scan (A-TDS) feature with an FFT bandwidth of 350MHz that helps identify noise sources along with their location and prevents missing any noise during analysis.
The CISPR25 from Faraday Defense Corp. is a Semi Anechoic EMC Chamber that is specifically designed for benchtop testing of automotive components and wiring harnesses. It has a testing distance of 1 m and a shielding of 100 dB. This anechoic chamber is fully compliant with CISPR 25 (emission) and ISO 11452-2 (immunity) standards.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.