EMC Power Amplifiers
from Exodus Advanced Communications
The AMP20180 from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1 to 1000 MHz. It delivers a saturated output power of 50 W (CW/Pulse) with a power gain of more than 47 dB and a gain adjustment range of over 20 dB. This power amplifier is based on Class A/AB linear design equipped with high-power advanced technology devices, achieving high efficiency.
The Filtered Connector Express from Spectrum Control are Circular Connectors designed to mitigate electromagnetic interference (EMI) before it enters the system. They can replace up to 128 discrete EMI filters, thereby providing a space-saving filtering alternative. These connectors feature a combination of planar and substrate-based filtering technologies that results in high performance compared to on-board or chip-in-seal versions.
The SEA HYT from Siepel is an RF Absorber that operates from 30 MHz to 40 GHz. It is designed to optimize the usable space inside anechoic chambers while maintaining the performance required by industrial and defense EMC standards such as CISPR/EN 14-16 and MIL-STD-461. This absorber utilizes a hybrid truncated design and provides high reflectivity performance over a wide frequency range when glued to ferrite tiles.
Spectrum Analyzer
from Good Will Instrument Co., Ltd.
The GSP-8380 from Good Will Instrument is a Spectrum Analyzer that operates from 9 kHz to 3.8 GHz. It is a general-purpose spectrum analyzer designed to provide wideband spectrum analysis for various test and measurement environments. This analyzer consists of a pre-amplifier along with optional EMI filter and tracking generator that improve spectral purity over the frequency range.
Connect with the entire embedded community and experience the latest developments in
the embedded systems industry live at the embedded world Exhibition & Conference – from
10–12 March 2026 at the Exhibition Centre Nuremberg. Click here to learn more.
The REMC06G12G2G from RF-Lambda is an EMC Solid State Power Amplifier that operates from 6 to 12 GHz. It delivers a saturated output power of 59.5 dBm and a small signal gain of 70 dB. This amplifier is based on GaN technology and has a digital control attenuator that provides attenuation in 0.5 dB steps.
Bulk Current Injection (BCI) Probe
from TEKBOX Digital Solutions
The TBBCI1-200K280 from TEKBOX Digital Solutions is a Bulk Current Injection Probe designed primarily for conducted immunity testing in the frequency range 150 kHz to 230 MHz. It has an insertion loss is 8dB and a typical transfer impedance of 26 dB Ohm. This probe is capable of injecting levels 1, 2, 3, and stress level X up to 30V 150 Ohm test set-up according to IEC/EN 61000-4-6 compliance.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.