EMC Power Amplifiers
from Exodus Advanced Communications
The AMP20085 from Exodus Advanced Communications is a solid-state EMC power amplifier that operates from 1 to10 GHz. It delivers an output power of more than 100 W, with a gain of more than 50 dB and has a gain-adjustment range of more than 20 dB. This SSPA is based on a Class A/AB linear design, ensuring high efficiency, exceptional reliability, and rugged construction.
The R&S®ESRP7 from Rohde & Schwarz is an EMI test receiver and signal/spectrum analyzer that operates from 9 kHz to 7 GHz. It supports both conventional stepped frequency scans and fast FFT-based time domain scans, enabling efficient electromagnetic disturbance measurements in pre-compliance and full-compliance testing. Designed to meet CISPR 16-1-1 standards, it offers a comprehensive set of detectors—including peak, quasi-peak, average, RMS, and meter-time-constant options—for precise evaluation of emissions during development, certification preparation, and final testing.
Spectrum Analyzer
from Good Will Instrument Co., Ltd.
The GSP-8800 from Good Will Instrument Co., Ltd. is a Benchtop Spectrum Analyzer that operates from 9 kHz to 8 GHz. It has a typical sensitivity of -160 dBm/Hz (with preamplifier ON) and a phase noise of -104 dBc/Hz, ensuring accurate signal analysis across a wide range of applications such as spectrum analysis, EMI/EMC testing, and RF/microwave signal analysis.
The Series 100 from Select Fabricators are Shielded Tents that operate from 400 MHz to 18 GHz. They provide shielding effectiveness of up to -90 dB and have been tested to meet IEEE 299 EMC Standards. These shielded tents are made using NovaSelect™ RoHS compliant, silver/copper/nickel conductive fabric and feature a patented single-door or double-door seal system.
Exodus AMP20081 is a rugged Class A/AB amplifier delivering 500 W across 80–1000 MHz, with >400 W P1dB, 56 dB gain, and robust linearity. Engineered for EMI/RFI, CW/Pulse, lab, and comms use, housed in a 5U chassis with extensive built-in protection. Click here to learn more.
Bulk Current Injection (BCI) Probe
from The EMC Shop
The BCI400M from The EMC Shop is a snap-on Bulk Current Injection (BCI) probe that operates from 1 MHz to 400 MHz and is designed for conducted immunity testing of automotive products. It supports multiple severity levels from I (60 mA) up to IV (200 mA) according to ISO 11452-2 and customer-specified level V up to 350 mA. With a typical insertion loss of 5 dB and a transfer impedance of 29 dB Ohm, it delivers reliable performance for RF current monitoring and immunity testing tasks.
Exodus AMP20172 is a rugged, Class A/AB amplifier delivering 150W output from 6.0–18.0 GHz. 100W P1dB, 55 dB gain, and robust linearity, engineered for EMI/RFI, CW/Pulse, lab, and communications applications. 7U chassis, extensive built-in features. Click here to learn more.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.