Latest News & White Papers this Week

12 Aug, 2025 Newsletter - EMC Directory

Top stories this week. View it in your browser

New Products Directory News Whitepapers Articles Calculators Events Webinars


Weekly Edition
Date: 12 Aug, 2025

EMC Magazine - Download Now!

Featured Products this Week

30 W Solid-State EMC Power Amplifier from 0.7 to 6 GHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP10131 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 0.7 to 6.0 GHz. It delivers an output of 30 W, with a minimum gain of 44 dB. This SSPA is based on Class A/AB linear technology, achieving exceptional linearity and ultra-wide instantaneous bandwidth. It requires a DC supply of 28–30 V and consumes 7 A of current at rated output.

Download Datasheet

Pre-Amplifier from 10 MHz to 10 GHz for Near-Field Probes

EMC Pre-Amplifier from Langer EMV-Technik GmbH

The PA 3010 from Langer EMV-Technik is an EMC Pre-Amplifier that operates from 10 MHz to 10 GHz. It delivers a gain of 30 dB and has a noise figure of 2.5 dB at 5 GHz. This amplifier is specifically engineered to amplify weak measurement signals, such as those from near-field probes, and is designed for connection to a 50 Ohm input of a spectrum analyzer or oscilloscope.

Download Datasheet

Anechoic Chamber for E-Drive Testing from 9/150 kHz to 18 GHz

Anechoic Chamber from Frankonia Germany EMC Solutions GmbH

The EDTC-AX from Frankonia Germany EMC Solutions GmbH is an Anechoic EMC chamber designed for EMC testing at 9/150 kHz to 18 GHz. It is specifically engineered for use with two external dynamometers and fixed shielded shafts via a 90° gearbox, which minimizes metallic materials inside the chamber to ensure accurate measurements at a 1.0 m test distance.

Download Datasheet

Free eBook - Download Now!

Bulk Current Injection Probe from 4 kHz to 400 MHz

Bulk Current Injection (BCI) Probe from Fischer Custom Communications

The F-250606-1008-1 from Fischer Custom Communications is a Bulk Current Injection (BCI) Probe that operates from 4 kHz to 400 MHz. It has a current rating of up to 300 mA for continuous use for 8 hours without overheating. This differential mode BCI probe has a secondary power rating of up to 50 A at DC-400 Hz. It has an inner diameter of 65 mm and an outer diameter of 142 mm and measures 54 mm in height.

Download Datasheet

EMC/EMI Filter for Power Supply Protection

EMC / EMI Filter from Exxelia

The BC-9112-016 from Exxelia is an EMC/EMI Filter that is used for RF interference protection of power lines. It has a current rating of up to 16 A and a voltage rating of up to 250 Vrms (at 50/60/400 Hz). This antiparasitic filter can reduce the disturbance level to an admissible value to comply with the different standards or to reduce the sensitivity of an appliance within a given frequency range.

Download Datasheet

Upcoming Event

EMC + SIPI 2025

Date: 18 to 22 August, 2025

Location: Raleigh, NC

More Events

About EMC Directory

EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.

To unsubscribe please click here

{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}

Related News

Related Products

Newsletters

Signup for Weekly Updates

Other Newsletters

Latest News & White Papers this Week