EMC Power Amplifiers
from Exodus Advanced Communications
The AMP10106 from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 20 to 500 MHz. This class AB amplifier provides a saturated output power of 350 W with a power gain of over 50. It is fabricated using an advanced solid-state linear balanced design and is suitable for all single-channel modulation standards. The amplifier has harmonics of -25 dBc and spurious levels of under -60 dBc.
The R&S®EPL1001 from Rohde & Schwarz is an EMI Test Receiver that operates from 5 kHz to 1 GHz. It is designed for quick and precise electromagnetic interference (EMI) emissions measurements. This test receiver is ideal for both pre-compliance and compliance scenarios, such as measurements during development, preparing certification, and final testing.
The SHA861A from Siglent Technologies is a Handheld Spectrum Analyzer that operates from 9 kHz to 3.6 GHz. It has an analysis bandwidth of up to 40 or 110 MHz, a resolution bandwidth of 1 Hz to 10 MHz, and an amplitude accuracy of up to ±0.7 dB. The 110 MHz bandwidth is used for IQ data acquisition and real-time spectrum analysis with a 100% POI time of 3.51 µs.
EMC Directory recently interviewed Marjan Mak, the Head of the EMC Laboratory at Slovenian Institute of Quality and Metrology (SIQ) with more than 20 years of experience in EMC and wireless compliance, covering a wide range of product types.Click here to read the full Interview
The 4350 EMCamTM Camera System from ETS-Lindgren is an EMI-Shielded Camera that has a resolution of over 550 TV-Lines. It is RF-immunity shielded up to 200 V/m (CW) and 600 V/m (PM) at up to 18 GHz and is EMC compliant with CISPR 25 Class 5, -10 dB specification. This camera has an EXview HAD CCD image sensor and has 10x optical zoom (motorized) with 12x digital zoom.
EMC Power Amplifiers
from Becker Nachrichtentechnik GmbH
The iAMP300600047-R by Becker Nachrichtentechnik is an EMC Solid-State Power Amplifier that operates from 300 to 6000 MHz. It delivers an output power of +49 dBm (50 W) and supports fixed gain & automatic level control (ALC) modes and has an ALC resolution of 0.05 dB. This power amplifier has an integrated CW/pulse generator that operates from 300 to 6000 MHz and ensures precise signal generation.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.