Top Electromagnetic Compatibility (EMC) Products in 2025

https://cdn.emc-directory.com/news/700375_52__639040730305074505.webp712370

EMC Directory has been publishing new and interesting EMC products introduced by companies for the Electromagnetic Compatibility (EMC) industry. In this article, we have compiled a list of top EMC products that were trending on the website in 2025. Product categories include EMC test receivers, spectrum analyzers, EMI/EMC chambers, field probes, LISNs, surge generators, and compliance test software. Visit the EMC Hub on EMC Directory to stay updated with the latest in EMC technologies and solutions.

400 W Solid-State EMC Power Amplifier from 1 to 2.5 GHz

The AMP20089 from Exodus Advanced Communications is a Solid-State EMC Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of 400 W (CW/Pulsed) with a gain of over 56 dB. This SSPA is based on the Class A/AB linear amplifier design that achieves high efficiency with unprecedented reliability and ruggedness. Learn more.

Solid-State Power Amplifier (SSPA) from 6.0 to 18 GHz

The 4151 from Ophir RF is a 250 W Solid-State Power Amplifier (SSPA) that operates from 6.0 to 18 GHz. It delivers a saturated output power of 250 W with a small signal gain of more than 54 dB and supports CW/AM/FM/PM/Pulse input signal formats. It has a P1 power of 80 W, an IP3 of 58 dBm, harmonics of -20 dBc, and a spurious of -60 dBc. Learn more.

50 W, Solid-State Amplifier from 6 to 18 GHz

The R&S®BBA300-FG50 from Rohde & Schwarz is a Solid-State Amplifier that operates from 6 to 18 GHz. It delivers a nominal output power of 50 W and a nominal power gain of 47 dB (@1 GHz) with gain flatness of up to +/- 3 dB. This amplifier is designed with spurious emissions of better than -80 dBc and harmonics of -20 dBc. It has a noise figure of 13 dB and a noise power density of -110 dBm. Learn more.

Fully Automated Turntable for EMC Testing

The TTW-400 from Com-Power Corporation is a Fully Automated Turntable with a RPM of 2:1. It has a table diameter of 1.2 meters and a nominal table height of 23 cm. This motorized fully automated turntable positioner can be rotated clockwise or counterclockwise using the reversing drum remote switch and supports extension cable (3-meter cable) controller interface. Learn more.

Real-Time Spectrum Analyzer with WR-12 Interface from 60 to 90 GHz

The SPECTRAN V6 PLUS XPR 250XB-WR12 from Aaronia AG is a Real-Time Spectrum Analyzer (RTSA) that operates from 60 to 90 GHz. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including the shortest signal transmissions. Learn more.

CISPR-16-1-1 Compliant Dual-Channel EMI Receiver

The EMSCOPE from EMZER Technological Solutions is an EMI Receiver that operates from 9 kHz to 30 MHz. It is designed according to CISPR-16-1-1 and CISPR 16-1-2 and offers comprehensive measurement capabilities for common and differential mode conducted emissions. This receiver combines two simultaneous EMI Receivers, each equipped with peak, quasi-peak, and average detectors, and also, includes two transient limiters. Learn more. 

E/H Field Generator from 10 kHz to 100 MHz

The ATP10K100M from AR RF is an E/H Field Generator that produces both E (electric) and H (magnetic) fields. It has a field strength of up to 800 V/m over a frequency range of 10 kHz to 100 MHz. This field generator can handle an input CW power of up to 3000 W and has a VSWR of less than 2.0:1. This field generator is very flexible as it can be rotated and the height adjusted to accommodate the unit under test. Learn more. 

Automotive EMC Testing Anechoic Chamber

The TEK-CISPR 12 Chamber from Tekiknow Technologies India Pvt. Ltd. is an Anechoic Chamber operating at frequencies from 9 kHz to 18 GHz. It evaluates the electromagnetic compatibility (EMC) of automotive components and systems, meeting the stringent requirements of CISPR 12, which governs the assessment of radio disturbances in vehicles, boats, and electrical devices. Learn more. 

Horizontal/Vertical (H/V) E-Field Generator from 10 kHz to 30 MHz

The 5502 from ETS-Lindgren is a Horizontal/Vertical (H/V) E-Field Generator that operates from 10 kHz to 30 MHz (vertical or E-mode) and 100 kHz to 30 MHz (horizontal or H-mode). It has a two-conductor line system that generates a transverse electromagnetic wave (TEM) with a field strength of up to 200 v/m. Learn more. 

EMC Filter Module for Noise-Sensitive Analog Circuit Applications

The FC-L01D from MORNSUN is an EMC Filter Module that provides primary side protection by suppressing AC power surge in compliance with IEC61000-4-5. It can handle surge levels of ±2kV (2O source resistance)/±4kV (12O source resistance) and a frequency attenuation coefficient of 20 dB. Learn more. 

MIL Qualified Power Supply Protection Filter

The BCC from Exxelia is a MIL Qualified Power Supply Protection Filter for Anechoic Chambers, Faraday Cages, and Shelters.  It has a current rating of up to 800 A and a voltage rating of 28 - 400 V. This filter has DC protection with an insertion loss of up to 100 dB (at 10 kHz). It has an asymmetric design with single line protection and has zoning and feedthrough mounting. Learn more. 

Compact 30 kV ESD Simulator with Touchscreen Control

The EDS MAX30 from 3Ctest is a high-performance ESD Simulator that generates electrostatic discharge of up to 30 kV. It complies with ISO 10605, GB/T 19951, IEC 61000-4-2, and related standards. This simulator provides a voltage range of 0.2 kV to 30 kV (±5%) with 100 V resolution and a maintained time of 5 to 10 seconds. Learn more. 

Modular Handheld ESD Generator up to 30kV

The ESD3000 by EMC Partner is an ESD Generator with a fully portable construction with no additional basic unit requirement. It includes an LCD control panel with 6 menu buttons,1 trigger button, and a holding time of more than 5 s. The generator supports a maximum voltage of 16 kV or 30 kV, depending on the chosen modules, with voltage steps of 100 V for testing. Learn more. 

Carbon-loaded Polystyrene Pyramidal EMC Absorber from 10 MHz to 40 GHz

The HT65 from DMAS is an EMC Closed-Cell, Carbon-Loaded Polystyrene Absorber for use in semi-anechoic chambers. It operates in a frequency range from 10 MHz to 40 GHz and has superior electromagnetic absorption when combined with matching ferrite tiles with a power handling capability of up to 500 V/m. Learn more. 

Reverberation Chamber for High-Field Strength Radiated Immunity Testing

The RVC from MVG EMC is a reverberation chamber designed for EMC test sites requiring high-field strength radiated immunity tests. It offers lower overall cost and higher field-to-input power ratios. The RVC consists of a shielded room and a stirrer/tuner, made of metallic plate structure that is rotated during testing. Learn more. 

Passive Near-Field Probe for Magnetic Field Measurements from 1 to 10 GHz

The SX-R 3-1 from Langer EMV-Technik is a Passive Near-Field Probe that operates from 1 to 10 GHz. It is designed to conduct magnetic field (H-field) measurements with high resolution. This RF probe enables measurements near the electronic assembly, such as individual ICs, to identify sources of interference. Learn more. 

Radiated and Conducted Immunity Test System from 4 kHz to 1 GHz

The NSG 4070D from AMETEK CTS is a Radiated and Conducted Immunity Test System for frequencies from 4 kHz to 1 GHz. It consists of coupling / decoupling networks (CDNs), current probes, EM clamps, LAS 61 series loop antennas, external power amplifiers, switch SW 4070, attenuators, and RF cables. Learn more. 

Direct Power Injection Immunity Testing System

The DPI (Direct Power Injection) Immunity Testing System from Noise Ken is   for evaluating semiconductor IC immunity. This IEC 62132-4 compliant system enables automated testing by directly injecting RF interference power into the IC power supply and performing real-time malfunction judgments based on IEC 62132-1 classifications. This has operating frequency of 150 kHz to 1000 MHz and a power level from 10 dBm to 37 dBm. Learn more. 

Immunity Test System from 80 MHz to 6 GHz

The R&S®TS9981C from Rohde & Schwarz is an Immunity Test System with a frequency range of 80 MHz to 6 GHz and a field strength of 10 V/m (+ 80 % AM or higher). It has a test distance of up to 3 m and supports CW, AM, FM, fM, and PM modulations. This immunity test system consists of a signal generator of up to 6 GHz, a broadband amplifier system of 80 MHz to 6 GHz, a power measurement system for forward and reverse monitoring, and a field monitoring system of up to 6 GHz. Learn more. 

50 µH Line Impedance Stabilization Network (LISN) from 9 kHz to 30 MHz

The TBL5008-2C from TEKBOX Digital Solutions is a Line Impedance Stabilization Network (LISN) that operates from 9 kHz to 30 MHz. It provides a stable 50? (50µH + 5?) impedance and includes air-core inductors to avoid saturation under load. This LISN has a 50 µH inductor and is designed for testing single phase, AC-powered equipment with supply voltages up to 250 V and a maximum current of 8 A. Learn more. 

10 kHz to 2 GHz Preamplifier for EMI Diagnostic Testing

The EM-6990B from EM Antennas is a Preamplifier that operates from 10 kHz to 2 GHz. It is designed to be primarily used with EM Antennas’ EM-6992 near field probe set for performing EMI diagnostic testing. This preamplifier delivers a gain of 31 dB and has a noise figure of 4.75 dB. Learn more. 

500 or 1200 A/m Power Frequency Magnetic Field Generator

The EMS61000-8K from Everfine is a Power Frequency Magnetic Field Generator that can produce magnetic fields of strength 500 A/m or 1200 A/m. It produces Sine wave output current (45-65 Hz frequency adjustable) within an output range of 1-500 A (500 A/m) and 1-1200 A (1200 A/m). Learn more. 

Reverberation Chamber from 10 kHz to 40 GHz

The RVC S from Frankonia Germany EMC Solutions GmbH is a Reverberation Chamber that operates from 10 kHz to 18 or 40 GHz. It has a Lowest Usable Frequency (LUF) of 200 MHz at a working distance (?/4) of more than 400 mm, complying with IEC/EN 61000-4-21 and ISO 11452-11 standards. Learn more. 

Spectrum Analyzer from 9 kHz to 3.8 GHz

The GSP-8380 from Good Will Instrument is a Spectrum Analyzer that operates from 9 kHz to 3.8 GHz. It is a general-purpose spectrum analyzer designed to provide wideband spectrum analysis for various test and measurement environments. This analyzer consists of a pre-amplifier along with optional EMI filter and tracking generator that improve spectral purity over the frequency range. Learn more. 

TEM Waveguide Cell for Radiated Emission and Immunity Measurements

The GTEM-1000 from GTemCell Group is a TEM Waveguide Cell that operates from 9 kHz to 3 GHz (emissions) and 80 MHz to 6 GHz (immunity). It can function as an alternative measurement facility for both radiated emission and immunity measurements and is compliant with IEC 61000-4-20 standard. Learn more. 

EMC Pre-Amplifier from 30 to 3000 MHz

The MKV-822-0200 from MTS Systemtechnik GmbH is an EMC Pre-Amplifier that operates from 30 to 3000 MHz. It delivers a gain of up to 22.7 dB and has a noise figure of less than 2.7 dB with an output P1dB of 8 dBm. This amplifier has a reverse isolation of 25.5 dB and a VSWR of 1.3:1 (input/output). It requires a DC supply of +12 V and consumes less than 50 mA of current. Learn more. 

Visit the EMC Directory to learn more about the latest innovations in the EMC industry.