A summary of testing RF power amplifier designs
Webinar Overview
This webinar is intended for engineers who work on RF power amplifier design and testing. It will cover the purposes of research & development, characterization, and production.
We will be discussing how to get from electronic design automation to real RF devices while focusing on verification, characterization, repeatability, and throughput. Learn about the benefits and needs for testing with CW and modulated signals. Design optimization through topologies such as Doherty, envelope tracking, and load modulation balanced amplifier will conclude the R&D part. The next step is to make the design ready for production. We will be discussing data volume challenges, test automation, and lifecycle testing. Finally, we will consider the requirements for production testing at the wafer and packaged device level. Test times and test setup calibration down to DUT ports are key.
Other Webinars by Rohde & Schwarz
-
-
-
Automotive EMC testing under dynamic driving conditions
- 18 July, 2023
- 4:00 PM SGT/ 10:00 AM CEST (Asia/Europe), 6:00 PM CEST/12:00 PM EDT ( Europe/Americas)
- 1 Hour
-
-
-
EMI testing - from stepped scan to wideband FFT
- 6 June, 2023
- 3 PM SGT (Asia) / 9 AM CEST (Central Europe)
- 45 minutes
-
Please wait...